Indesit R45NFUK Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Frigorifero Indesit R45NFUK. Indesit R45NFUK 17. No-frost

Indesit R45NFUK Manuale d'uso
Installation and
safety instructions
Read this manual carefully.
Read the safety warnings and operational
instructions carefully prior to operating your
refrigerator.
Always keep this manual ready.
Always keep this manual ready to use as
a quick reference in case of possible
troubles that may arise during the operation
of your refrigerator.
Obey the warnings.
Obey all the warnings on the refrigerator
and within the operational instructions.
Follow the instructions.
All instructions that are mentioned in the
Owner's Manual shall be followed and
applied during operating and using the
appliance.
Carry out the procedures listed below, after
unpacking the refrigerator. Call the Indesit
Authorized Service in case of any
possible problem that you may face.
1. Install all shelves and accessories in
their proper places, since they are packed
together to prevent possible damage during
transportation.
2. Dust may accumulate on your refrigerator
and its accessories during packing and
transportation. First, clean the interior and
accessories of your refrigerator with a
baking soda solution and lukewarm water.
(One tea-spoon baking soda for a bucket
lukewarm water). Then rinse with clean
water and dry.
3. The lamps provided for the fridge
compartment must light whenever
the door of the refrigerator is opened.
4. Turn the freezer compartment button to
"MAX" position and allow the refrigerator
to operate unloaded for a few hours. The
fridge and freezer compartments will be
cooled during this period.
5. Prior to use, let the refrigerator run for
a few hours; then place the food.
6. Avoid placing the refrigerator near heat
sources and direct sunlight. Heat may
adversely effect the plastic and electrical
components of your refrigerator. Therefore,
never place the appliance in the vicinity of
heat sources like stoves, radiator etc. Nor
expose it to direct sunlight.
7. Position the appliance in such a
way that you can access the
socket where it is plugged in.
8. When placing your refrigerator, allow at
least a 5 cm clearance on the sides and
2 cm from the back-side wall. In case the
appliance is going to be placed in a
recessed area, allow at least a 25 cm
clearance above it.
9. For your own safety, use grounded
plug in operating the appliance. Consult a
qualified electrician if the plug is not
grounded or if the socket does not fit your
household electrical installation. The
manufacturer is free of any
responsibility due to any damage
or loss resulting from ungrounded
operation.
10. Ensure that the power supply voltage
complies with the figures stated on the tag
inside the fridge compartment.
The operational voltage of your refrigerator
is 10 Amperes. Connect the power cord to
a grounded plug bearing a current rate of
10 Amperes.
11. At the end of the functional life of your
appliance containing cyclopentane gas in
the insulation foam and perhaps gas
R600a (isobutane) in the refrigeration
circuit the latter should made safe before
being sent to the dump.
For this operation, please contact your
dealer or the Local Organisation in
charge of waste disposal.
3