Indesit TIA 12 TK Series Manuale di istruzioni per l'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Frigorifero Indesit TIA 12 TK Series. Indesit TIA 12 TK Series 12. 2-door fridge

Stampa la pagina

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to operate

correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between

the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation

kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical socket

ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left

side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated on

the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised

technician to replace it ( see Assistance ). Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).

! The manufacturer declines any liability should these safety

measures not be observed.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions ( see Installation ).

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

1. Insert the plug into the socket and ensure that the internal light

illuminates.

2. Turn the TEMPERATURE ADJUSTMENT knob to an average

value. After a few hours you will be able to put food in the

refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment automatically

adjusts itself according to the position of the TEMPERATURE

ADJUSTMENT knob.

1 = warmest

We recommend, however, a medium position.

The cooling section of the refrigerator is located inside the back wall

of the refrigerator compartment for increased space and improved

aesthetics. During operation, the back wall will be covered in frost

or water droplets depending on whether the compressor is

operating or paused. Do not worry, the refrigerator is functioning

normally.

If the TEMPERATURE ADJUSTMENT knob has been set on high

values with large quantities of food and with a high ambient

temperature, the appliance can operate continuously, resulting in

excessive frost formation and excessive energy consumption:

compensate for this by shifting the knob towards lower values

(defrosting will occur automatically). In static appliances, the air

circulates in a natural way: the colder air tends to move downwards

as it is heavier. The food should be stored as follows:

Arrangement inside the

Food

refrigerator

Fresh fish and meat

Above the fruit and vegetable bins

Fresh cheese

Above the fruit and vegetable bins

Cooked food

On any shelf

Salami, loaves of bread,

On any shelf

chocolate

In the fruit and vegetable

Fruit and vegetables

compartment bins

Eggs

On the shelf provided

Butter and margarine

On the shelf provided

Bottles, drinks, milk

On the shelves provided

If ambient temperature is less than +15°C You can activate

switch in the light box to have correct temperature in both

compartments till ambient temperature will be higher than

+15°C. Note: Energy Consumption will

be increased.

If You can see condensate on the top

of fridge compartment You can

activate the same switch till

condensate will be excluded.

Note: Energy Consumption will be

increased.

PURE WIND

PURE WIND *

It is recognizable due to the presence of the mechanism on the top

part of the refrigerator compartment ( see diagram ).

Varies by number and/or position, available only on certain

models.

5 = coldest