Indesit DFO 3T133 A F X Manuale rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale rapido per Lavastoviglie Indesit DFO 3T133 A F X. Indesit DFO 3T133 A F X 37.
Anche per Indesit DFO 3T133 A F X: Manuale rapido (33 pagine)

Stampa la pagina

Quick Guide

TROUBLESHOOTING

In case your dishwasher doesn't work properly, check if the problem can be solved by going through the following list. For other errors or issues

please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period

of either up to 7 or up to 10 years, according to the specific Regulation requirements.

PROBLEMS

POSSIBLE CAUSES

No water in the water supply or the tap is closed.

The dishwasher does

not fill the water. Display

The inlet hose is bent.

shows:

and F6, both

On/Off and START/Pause

The sieve in the water inlet hose is clogged; it is

LEDs are blinking rapidly.

necessary to clean it.

Dishwasher finishes the

Drain hose positioned too low or siphoning into

cycle prematurely.

home sewage system.

Display shows: F15 and

both On/Off and START/

Pause LEDs are blinking

Air in water supply.

rapidly.

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.

• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales

Service, please state the codes provided on your product's identification plate.

The model information can be retrieved using the QR-Code reported in the energy label.

The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.

Please scan the QR code on your product in order to have more detailed information.

SOLUTIONS

Make sure there is water in the water supply or the tap running.

Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and

reboot.

After having carried out the verification and cleaning, turn off and turn on the dishwa-

sher and restart a new program.

Check if end of drain hose is placed at correct height (see INSTALLATION).Check for

siphoning into home sewage system, install air admittance valve if necessary.

Check water supply for leaks or other issues letting air inside.

IEC 436