Indesit SX 896L PX Manuale di istruzioni per l'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Forno Indesit SX 896L PX. Indesit SX 896L PX 20. Oven

Stampa la pagina

Start-up and use

! The first time you use your appliance, heat the

empty oven with its door closed at its maximum

temperature for at least half an hour. Ensure that the

room is well ventilated before switching the oven off

and opening the oven door. The appliance may emit

a slightly unpleasant odour caused by protective

substances used during the manufacturing process

burning away.

! To make the setting process easier, keep the knob

in position: this will increase the scrolling speed of

the numbers on the display.

! Each setting will automatically be stored in the

appliance memory after 10 seconds.

! The touch controls cannot be activated if the user

is wearing gloves.

Some models are equipped with a system of hinges

which allows the door to close slowly, without the

user having to follow the movement through with his/

her hand. To use the system correctly, before

closing the door:

• Open the door fully.

• Do not force the closing movement manually.

Control panel/door lock

! The door and control panel can be locked while the

oven is off, once cooking has started or finished and

during programming.

To lock the door and the oven controls, press and

hold the

button for at least 2 seconds. A buzzer

sounds and the display shows the key symbol "n—

O". The

and

function activation.

To deactivate the lock, press and hold the

button again for at least 2 seconds.

! When cleaning the appliance, the door lock may be

closed accidentally (there is an exposed spring). If

this happens, reopen it by turning the door lock

upwards (see figure).

Setting the clock

! The clock can only be set when the oven is

switched off. If the oven is in standby mode,

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

icons, when lit, indicate lock

pressing the

button once will display the current

time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the

button and the digits on the

display will flash for 10 seconds.

To set the clock:

1. Press button

2. Turn the TIMER knob towards "+ + + + + " and "- - - - - " to

adjust the hour value.

3. Once you have reached the correct hour value,

press the

button.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the

clock. If the

icon flashes on the display, this

indicates that the clock has not been set correctly.

Setting the minute minder

! The minute minder may still be set whether the

oven is switched on or off. It does not switch the

oven on or off.

When the set time has elapsed, the timer emits a

buzzer that will automatically stop after 30 seconds

or when any active button on the control panel is

pressed.

To adjust the timer proceed as follows:

1. Press button

2. Adjust the time as desired by turning the TIMER

knob towards "+ + + + + " and "- - - - - ".

3. Once you have reached the desired value, press

the

button again.

The lit

symbol will remind you that the minute

minder is on. The DISPLAY will show the countdown.

To cancel the minute minder, press the

and use the knob to set the time to 00:00. Press

button

again.

The

icon will switch off to indicate that the

minute minder has been disabled.

Starting the oven

1. Switch the control panel on by pressing the

button. The appliance buzzer sounds three times

(ascending) and all buttons light up in sequence.

2. Select the desired cooking mode by turning the

SELECTOR knob. The display shows:

- the temperature associated with the mode, if

programming manually;

button