Indesit IS5V5CCW/E Manuale d'uso - Pagina 45

Sfoglia online o scarica il pdf Manuale d'uso per Fornelli Indesit IS5V5CCW/E. Indesit IS5V5CCW/E 48. Cooker and oven
Anche per Indesit IS5V5CCW/E: Manuale di istruzioni per l'uso (28 pagine)

Stampa la pagina

REMOVING AND REFITTING THE DOOR

To remove the door, open it fully and lower the

catches until they are in the unlock position.

Close the door as much as you can.

Take a rm hold of the door with both hands – do not

hold it by the handle.

Simply remove the door by continuing to close it

while pulling it upwards (a) at the same time until it is

released from its seating (b).

~60°

Put the door to one side, resting it on a soft surface.

Re t the door by moving it towards the oven,

aligning the hooks of the hinges with their seating

and securing the upper part onto its seating.

Lower the door and then open it fully.

Lower the catches into their original position: Make

sure that you lower them down completely.

Try closing the door and check to make sure that it

lines up with the control panel. If it does not, repeat

the steps above.

Catalitic Cleaning

In some models, the most exposed internal vertical

sides of the oven are coated with porous enamel,

which is called catalytic enamel. When heated, this

enamel destroys fat particles given off by the food.

This „oxidation" of the fat particles occurs when the

temperature of the sides exceeds 170°C. The porous

quality of the catalytic enamel increases the surface

area where the exchange vital to the oxidation of the

fats takes place.

After removing the door and resting it on a soft

surface with the handle downwards, simultaneously

press the two retaining clips and remove the upper

edge of the door by pulling it towards you.

Lift and rmly hold the inner glass with both

hands, remove it and place it on a soft surface before

cleaning it.

When reassembling the inner door glass

insert the glass panel correctly so that the

text written on the panel is not reversed

and can be easily legible.

~15°

Re t the upper edge: a click will indicate correct

positioning. Make sure the seal is secure before

re tting the door

If there is still grime on the catalytic surfaces after

the cooking programme has ended, leave the empty

oven on with the door shut, turning the temperature

adjustment knob to its maximum setting. Leave the

oven like this for a period of time between 60 and 90

minutes, according to how much dirt was left inside.

The cleaning process for more stubborn food residues

may be quickened by using hot water and a soft brush.

Assistance

Please have the following information to hand:

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the data plate

located on the appliance and/or on the packaging.