Indesit KD3E11/G Manuale di istruzioni per l'installazione e l'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione e l'uso per Fornelli Indesit KD3E11/G. Indesit KD3E11/G 24. 50cm free standing electric cooker

Stampa la pagina

Installation

WARNING – THIS APPLIANCE MUST BE EARTHED.

Fig. A

Fig. B

Electrical connection

Electric cookers come without a power supply cable. The cooker is designed

to operate on an electricity supply which conforms to the electrical data

shown on the Rating Plate. The cooker can be connected to the mains only

after removing the back panel of the cooker itself with a screwdriver.

N.B.: the following installation procedure must be carried out by a qualified

electrician. The electrical installation must comply with the IEE Regulations,

Building & local By-Lays.

For the installation of the feeding cable carry out the following operations:

Using a screwdriver, prise on the side tabs of the terminal board

cover (see fig. A);

Pull and open the junction blok lid

Important: the wires in the mains lead are coloured in accordance with the

following code:

Green & Yellow

Blue

Brown Live

As the colours of the wires in the mains lead may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

Green & Yellow wire to terminal marked "E" or

Green & Yellow.

Brown wire to terminal marked "L" or coloured Red.

Blue wire to terminal marked "N" or coloured Black (see fig. B).

fix the feeding cable in the special cable stop and close the cover.

N.B.: the power supply cable must have these minimum requirements:

Type: H05RR-F

Section: 3x4 mm

Ensure that the mains cable is routed away from any brackets affixed to the

rear panel and is not trapped to the rear wall when pushing the cooker into

position between cabinets.

Earth

Neutral

or coloured Green or