A-Neutronics MS-1917-LCD Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Unità di distribuzione dell'alimentazione A-Neutronics MS-1917-LCD. A-Neutronics MS-1917-LCD 8. 17 outlet 19in rack mount w/ lcd display

Stampa la pagina

LCD DISPLAY METER FUNCTION

METER FUNCTION

OVER VOLTAGE AND OVER CURRENT WARNING

1. LCD display will show "OUP" when the input voltage is over 145V.

2. LCD display will "blink" when the input current is over 15A.

FUNCTION

RANGE

Volts

95.0~125 Vrms

Amps

0.00~15.0 Amps

Watts

1875 Watt

1875 VA

Frequency

47.0~63.0Hz

Power Factor

0.00~1.00

KWh

0.00~9999

KWh hour

0.00~9999

(8) FUNCTIONS PROVIDED

Plug in the power strip and it starts to display current power supply status.

•

Voltage

•

Amp

•

Watt

•

Kwh

•

Runtime Clock

No start button required. FUNCTION and SET buttons are located on the right side of the

LCD Display.

OPERATION

1. Plug in the strip, the display will show voltage reading.

2. Press "FNC" button, to show amperage reading.

3. Press "FNC" button again, to show watt reading.

4. Press "FNC" button again, to show VA (apparent power) reading.

5. Press "FNC" button again, to show Hz (frequency) reading.

6. Press "FNC" button again, to show PF (power factor) reading.

7. Press "FNC" button again, to show KWH (kilo watt per hour) reading.

8. Press "FNC" again, to show runtime (clock).

RE-SET KWH AND CLOCK

Press "SET" button for about 3 seconds at KWH or clock mode to reset the KWH and clock.

NOTE: Pressing "SET" in any other mode brings up a menu that permits the base value

of the power strip to change.The range is 1-30 Amps incrementally. This should never

be changed!! This power strip is designed to operate at 15Amps and changing the value

will only give incorrect meter readings. Changing the value does not allow more then the

specified amperage on the label.

ACCURACY

0.2%

0.3%

0.5%

+/- 0.1Hz

0.01%

.5%

30ppm