AEG A 85240 GT Manuale operativo e di installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale operativo e di installazione per Congelatore AEG A 85240 GT. AEG A 85240 GT 20. Chest freezers “ no frost”

1 Fill the ice cube maker until

the cubes will be full in the

horizontal position or by the

load line mark in the vertical

position. After this close the

ice cube maker with cap.

2. Place it in the freezer and

leave to solidify holder in the

lid of the.

3. To loosen the frozen cubes,

either bend the ice cube tray or hold it under running water for a few seconds.

Important! Never try to free an ice tray that is frozen to the freezer

compartment using pointed or sharp edged objects. Use a soft plastic scraper.

Warning! Risk of electric shock! Prior to replacement of electric bulbs,

remove the plug from the mains socket or disconnect or unscrew the fuse or

lodgement.

1 Turn the temperature control

knob counterclockwise to"off"

position.

2. Remove mains plug

3. For replacement of the bulb

press the cover hook and

remove as

illustration

4. Replace defective light bulb.

5. Place the cover again.

Lamp specification: 220 to 240 V, max 15W bulb holder: E14

Food must be cold before freezing (no more than room

temperature)

Food must be packed in airtight and moisture -proof

packaging to prevent it from drying out.

Place fresh food for freezing close to the cold sides of the

freezer, making sure that it is not in contact with frozen food already in the

freezer.

Never fill the freezer to more than loading line (arrow with dashed line)

shown on the illustration.

See under "Helpful hints".

shown in the

Load line

For the removal of the lampshade you have to

push the hook by a screwdriver first, and than you can

turn it out

Cup of the ice cube maker

Load line of the ice cube maker