AEG A81000TNX0 Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Congelatore AEG A81000TNX0. AEG A81000TNX0 20.

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc. Ensure that air can circulate freely

around the back of the cabinet.To ensure best

performance, if the appliance is positioned below

an overhanging wall unit, the minimum distance

between the top of the cabinet and the wall unit

must be at least 100 mm . Ideally, however, the

appliance should not be positioned below over-

hanging wall units. Accurate levelling is ensured

by one or more adjustable feet at the base of the

cabinet. If the cabinet is placed in a corner and

the side with the hinges facing the wall, the dis-

tance between the wall and the cabinet must be at least 10 mm to allow the door to open

enough so that the shelves can be removed.

WARNING!

It must be possible to disconnect the appliance from the mains power supply; the plug

must therefore be easily accessible after installation.

Door reversibility

To carry out the following operations, we suggest that this be made with another person

that will keep a firm hold on the doors of the appliance during the operations.

To change the opening direction of the door, do these steps:

Remove the plug from the power socket.

Tilt back the appliance carefully so that the compressor cannot touch the floor.

Unscrew both adjustable feet.

Unscrew the screws of the door bottom

hinge.

Take off the appliance door by pulling it

slightly downwards.

Installation