AEG 502 D Istruzioni per l'uso e l'installazione - Pagina 13
Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione AEG 502 D. AEG 502 D 20. Electrolux extractor hood installation and operating instructions
Anche per AEG 502 D: Manuale di installazione e istruzioni per l'uso (16 pagine)
Care and Maintenance
Before performing any maintenance operation, disconnect the
hood from the electricity.
The hood has a metal grease filter.
To clean the filter, proceed as follows:
Open the grill by turning knob A (fig. 2).
A
2
Pull the two plastic stops B as shown by the arrows (fig. 5) and
remove the metal filter.
B
5
You should take out the metal filter every four weeks and wash it
either in the dishwashing machine or by hand.
Clean the internal housing only with warm washing-up water —
do not use any harsh cleaners, brushes, or abrasive.
Soak metal filter cassette for about one hour in hot water with a grease-
loosening cleaner, then rinse off thoroughly with hot water. Repeat the
process if necessary. Re-fit the cassette when it is dry.
Place metal filter cassette in dishwasher. Select most powerful washing
program and highest temperature, at least 65° C. Repeat the process.
Re-fit the cassette when it is dry.
When washing the metal grease filter in the dishwasher a slight discoloration
of the filter can occur.
M e t a l
grease filter
A
B
Hand-washing
Dishwashing
m a c h i n e
13