AEG CHDD 8694 Istruzioni per l'uso e l'installazione - Pagina 8

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione AEG CHDD 8694. AEG CHDD 8694 20. Cooker hood
Anche per AEG CHDD 8694: Istruzioni per l'uso e l'installazione (20 pagine), Istruzioni per l'uso e l'installazione (20 pagine)

Hood Operation

• Best results are obtained by using a low speed for normal

conditions and high speed when odours are more concentrated.

Turn the hood on a few minutes before you start cooking then you

will get an underpressure in the kitchen. It should be left on after

cooking for about 15 minutes or until all odours have disappeared.

The hood operation may be controlled via the control switches or

with the remote control

The control switches are located on lower side of the chimney.

1 - Hood OFF.

2 - Decreases the speed

3 - Hood ON, Increases the speed

4 - 5'/15' (minutes) timer

push once for 5' timer, twice for 15' timer, 3 times to turn the

timer OFF

5 - Filter reset

6 - Light ON/OFF

F - Saturated filter indicator light

- BUTTON 4: Activates and deactivates the timer. Automatically

turns the appliance off at the speed in operation.

LED on = timer activated - Duration 5 or 15 minutes as set.

- BUTTON 5: Once you have replaced the charcoal filters, press

this button for at least 3 seconds until the light turns off

- BUTTON 4+5: Remote control code programming. Keep both

buttons pressed for at least 3 seconds. A beep will sound to

indicate that the programming mode has been accepted.

Without releasing the buttons, press any one of the remote

control buttons. A beep will sound to indicate that the code has

been accepted and stored.

- F LED: Indicates that the charcoal filter is saturated.

This LED is also ON when the hood is used in the extractor

version, press BUTTON 5 until the light turns off.