AEG CHDE 3160 Istruzioni per l'uso e l'installazione - Pagina 14

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione AEG CHDE 3160. AEG CHDE 3160 19. Cooker hood
Anche per AEG CHDE 3160: Istruzioni per l'uso e l'installazione (19 pagine), Istruzioni per l'uso e l'installazione (20 pagine), Manuale operativo e di installazione (20 pagine), Manuale di istruzioni per l'uso (20 pagine)

Electrical connection (NOT FOR UK)

Before connecting the appliance to the power supply, check that the

voltage indicated on the rating plate corresponds to the mains power

supply available. Appliances fitted with a plug can be connected to any

standard power socket within easy access.

Should it be necessary to provide a fixed connection, the hood must only

be installed by an electrician authorised by the local electricity board.

When installing, an omnipolar disconnector with a distance of at least 3

mm between contacts must be provided.

The manufacturer declines all responsibility for malfunctions resulting from

failure to comply with the above instructions.

Electrical connection

220-230 V – by means of fixed power cable with plug.

(Fixed connection of the appliance must only be carried out by an au-

thorised electrician.).

Electrical connection (ONLY FOR UK)

Safety warnings for the electrician

The electric outlet should be placed on the wall inside the chimney. The

hood has a power cable, 150 cm, WITHOUT an earth connection and

the rated voltage is 220 - 240 V (CHDE 3160).

Connect the hood to the mains supply via a double pole switch

which has 3 mm minimum separation between the contacts.

The switch must be accessible at all times.

The following is valid in the United Kingdom only:

- the wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black, -

- the wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.