A-Neuvideo ANI-0108POE-AU Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Cavi e connettori A-Neuvideo ANI-0108POE-AU. A-Neuvideo ANI-0108POE-AU 16. 1x8 hdmi 18gbps splitter over cat6 196ft/60m

Stampa la pagina
A
NEUVIDEO
TRANSMITTER
SIDE PANEL
EDID DIP SWITCH:
Used to set EDID mode. Please refer to Section "6. EDID Mode" for details.
q
SERVICE PORT:
(2) USB MICRO-B; Used for firmware update and serial port com. Please refer to "7. ASCII Commands".
w
CAT Receiver
HDMI OUT:
HDMI output port, connect to HDMI display device such as TV or Projector with an HDMI cable.
q
CAT IN:
Connect to the CAT OUTPUT port on the transmitter with a CAT cable.
w
POWER INDICATOR LAMP (GREEN):
e
DATA SIGNAL INDICATOR LAMP (ORANGE):
r
SERVICE PORT:
Used for firmware update.
t
IR IN:
Connect to the IR Receiver cable. The IR signal will send to the IR OUT port of the transmitter.
y
DC 12V:
Plug DC 12V/1A power supply into the unit and connect the adapter to an AC outlet.
u
(Note: The CAT receiver also can be powered by the transmitter via a CAT cable.)
OPERATION CONTROLS & FUNCTIONS
When the receiver is powered on, the power indicator lamp will be on.
Illuminates when the device has a valid connection to the base unit.
5