AEG Perfekt Visor?30 Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Cappa di ventilazione AEG Perfekt Visor?30. AEG Perfekt Visor?30 8. Range hood
Anche per AEG Perfekt Visor?30: Manuale di istruzioni (14 pagine)
Trouble Shooting
If any problem occurs, please detach the plug from the
socket and contact Euro‐Parts or a similarly qualified
person in order to avoid a hazard.
Problem
Cause
The outlet valve is
blocked
Light on, but
motor does not
The capacitor has
work
failed
The control switch
has broken
Light does not
No power supply
work, motor
does not work
Fuse has blown
The propeller is
damaged or
unbalanced
Vibration
The hood is not
installed correctly
The distance
between the hood
and cooktop is too
Insufficient
great
suction effect
The filters are
saturated
Solution
Detach flue and duct
then turn on the hood
to check if the valves
open
Call for technical
service
Call for technical
service
Plug another appliance
into the socket to
confirm there is power
supply
Open up the plug and
replace he 13A fuse
Call for technical
service
Review the installation
instructions and check
the installation again
for loose screws,
brackets or
connections
Check that the
distance is between
600mm and 762mm
Clean the filters from
grease residue and
replace after cleaning
9 | P a g e
3 speed adjustment (see pic 7)
o Touch the Low button, and the motor will run at the
lowest speed
o Touch the Mid button, and the motor will run at
medium speed
o Touch the High button, and the motor will run at the
highest speed
o Touch the Light button, and the lighting lamps will
illuminate. Push it again and the lights will turn off
o On any speed, Touch Time button once and the delay
timer will start working. The motor will be turned off
automatically after 5 minutes
o Touch Time button twice, the motor will turn off
immediately.
Light Low Mid High Time
How to Use
Pic 7
6 | P a g e