A-Neuvideo ANI-2PIP-LOGO Manuale di istruzioni - Pagina 15

Sfoglia online o scarica il pdf Manuale di istruzioni per Monitor A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 20. 2x1 hdmi multiviewer
Anche per A-Neuvideo ANI-2PIP-LOGO: Manuale di istruzioni (15 pagine)

Stampa la pagina

NEUVIDEO

• INFORMATION BAR:

selected. These sections are: Information-In, Information-Out, Source, Mode, and Preset/Factory. They provide information about

the state of the unit, or control the most basic functions of the unit.

• INFORMATION-IN: Provides the detected resolution information about the source connected to each of the HDMI inputs.

• INFORMATION-OUT: Provides the unit's current output resolution as well as listing the current Window Mode.

• SOURCE: Provides controls for the A/V Mute function and Audio Source selection.

■ A/V Mute: When A/V Mute is enabled, all output will be disabled on the HDMI output.

■ Audio From CH: Select which HDMI input's audio to pass to both the HDMI and analog outputs.

NOTE: The analog output can only support LPCM 2.0 audio. Bitstream audio will be automatically muted.

• MODE: Provides controls for changing the Window Mode, swapping window sources, changing window priority and selecting

the input in the "NONE" window mode.

■ Window Mode: Allows selecting the current windowing mode from 4 choices: PIP (Picture-in-Picture), SBS (Side-by-Side),

POP (Picture-outside-Picture) and NONE (Full screen seamless switcher).

NOTE: The PIP, SBS, and POP modes will each recall their most recently saved window sizes and positions, not their

default arrangements. Changing this setting when Chromakey is enabled will automatically disable Chromakey mode.

■ Swap: Allows swapping the input channel between the windows in the multi-windowing modes.

NOTE: Enabling Swap mode will also automatically switch the Priority setting in order to maintain the existing Window

display priority.

■ Priority: Selects which input channel is on top in the multi- windowing modes.

■ From Input: Selects the input to display when the unit is in the "NONE" (Full screen seamless switcher) Windowing Mode.

• PRESET/FACTORY: Provides controls for saving and loading Presets and for resetting the unit.

■ Preset Save/Recall: This unit can store and recall up to four presets. Each preset stores the settings from the Mode,

Contrast, Brightness, Sharpness, Hue, image Still, Flip, and Upside-Down sections of the WebGUI for rapid, hassle-free,

recall.

NOTE: The output will briefly go black during the preset recall process.

■ Factory Reset: Click on the Factory Reset button to reset the unit to its factory default state. After the reset is complete,

the unit will reboot automatically.

NOTE: Network configuration details will not be reset.

• ADJUSTMENT TAB:

This tab provides controls over the general display characteristics of each input channel as well as providing

a way to set.

Across the top of the WebGUI are 5 sections that will always be displayed no matter which tab has been

• CONTRAST: Sets the contrast level for each

input channel with a range of 0 to 100. Clicking

on the slider will allow fine adjustments using the

arrow keys. The default value is 80.

• BRIGHTNESS: Sets the brightness level for

each input channel with a range of 0 to 100.

Clicking on the slider will allow fine adjustments

using the arrow keys. The default value is 50.

• SHARPNESS: Sets the amount of sharpness

processing to apply to each input channel with

a range of 0 to 20. Clicking on the slider will

allow fine adjustments using the arrow keys. The

default value is 10.

WebGUI Control