A-Neuvideo ANI-2PIP-LOGO Manuale di istruzioni - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per Monitor A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 15. 2x1 hdmi multiviewer
Anche per A-Neuvideo ANI-2PIP-LOGO: Manuale di istruzioni (20 pagine)

Stampa la pagina

WebGUI Control

• OSD SETTINGS: This section provides control over all OSD formatiing.

■ Timeout: Sets the length of time for the OSD to remain on the screen in seconds.

■ H-Pos: Sets the horizontal position of the OSD, set in percentage.

■ V-Pos: Sets the vertical position of the OSD, set in percentage.

■ Text/Font Color/Background Color: Displays the current values for the OSD format

that are configured by clicking on the "Edit" button.

• EDIT: Clicking this button opens the OSD Information Edit window to change the formatting of

the OSD.

• LOGO SETTINGS: This section provides control over the content and position of the user

uploaded logo image.

■ Logo Display: Clicking this button will display the customized text message on the

OSD.

■ H-Pos: Sets the horizontal position of the user logo, set in percentage.

■ V-Pos: Sets the vertical position of the user logo, set in percentage.

■ Upload New LOGO: To upload a graphic logo, please click the "Choose File" button

to open the file selection window and then select the graphic logo file (8-bit *.bmp format,

1920x1080 max resolution) located on your local PC. After selecting the file, click the

"Upload New LOGO" button to upload the logo

CHROMAKEY SETUP TAB:

This tab allows for the activation and configuration of Chromakey

mode. Enabling the Chromakey mode will automatically switch to displaying Input 1 underneath

Input 2 with the selected key values applied to Input 2's source video. The unit comes with 8 pre-

defined standard key definitions (White, Yellow, Cyan, Green, Magenta, Red, Blue, Black) and a

User configurable definition set.

■ Text: Define a text string to display on the OSD.

■ Font Color: Set the color of the OSD font.

■ Background Color: Set the background color of

the OSD's text block.

to the unit.

WebGUI Control

• CHROMAKEY SETUP: This section provides all controls relating to the chromakeying function

of the unit.

■ Color Set: Select from a list of pre-set chromakey ranges (White, Yellow, Cyan, Green,

Magenta, Red, Blue, Black) to perform simple, hassle-free keying or select "User" to enter

in custom keying value ranges. Clicking "Save to User" will copy the currently selected

pre-set ranges into the "User" slot for editing.

■ G Maximum/Minimum: When "User" is selected, sets the maximum and minimum

range for the green component of the chromakey (from 0-255).

■ R Maximum/Minimum: When "User" is selected, sets the maximum and minimum

range for the red component of the chromakey (from 0-255).

■ B Maximum/Minimum: When "User" is selected, sets the maximum and minimum

range for the blue component of the chromakey (from 0-255).

■ Chromakey: Enable or disable the chromakey function of the unit. When chromakeying

is enabled, the unit will automatically switch both windows to be full screen with Channel

Window 1 in front of Channel Window 2. The keying will be applied to Channel Window 1.

NOTE: Selecting any other Windowing mode will automatically disable chromakeying.

NETWORK TAB:

This tab provides access to control of the IP configuration and Login settings for

the unit.

• IP CONFIGURATION: The IP Address, Netmask and Gateway can be set manually, or DHCP

can be enabled for automatic IP Configuration if your local network supports it. The Telnet Timeout

can also be set, allowing control of the length of inactivity time before the unit releases its network

connection with a network connected control device. Click on "Save" to confirm and activate any

changes made to these settings.

NOTE: If the IP address is changed then the IP address required for WebGUI or Telnet access

will also change accordingly.

• LOGIN: This section provides User Configuration options including changing the password for

the Administrator account, and setting an idle user logout timer. Click on "Save" to confirm and

activate any changes made to these settings.