Kohler Composed K-EX20257T-NW-CP Manuale di istruzioni per l'installazione - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Apparecchiature per il bagno Kohler Composed K-EX20257T-NW-CP. Kohler Composed K-EX20257T-NW-CP 14. Desk-mount sensor faucet
4 5
220V
0.75
0.5~1
0.1MPa
1 ~55°C
0.5~71°C
0.05~
如何安装水龙头
一 龙头与面盆的安装固定
将固定螺杆(2)安装到水龙头(1)底部
处。再把垫片(3)套在固定螺杆上。并
嵌入水龙头底部的盘槽中。然后将电
源线(7)和出水软管(8)穿过安装孔,从
面盆下方将固定橡胶垫片(4)固定金属
垫片(5)和固定螺母(6)对齐固定螺杆向
上套入。调整水龙头电源线及出水软
管的位置。用扳手拧紧固定螺母以便
把水龙头固定在面盆上。
2. 控制阀组件的安装固定
拧松
10
9
12
4
(LR06×4)
50/60Hz
2.0L/min
1
2
4
6
7
11
9
13
12
PARAMETERS
Power: DC 4 pieces of AA size alkaline batteries
AC 220V, 50/60Hz
Senser Duration: Less than 0.75s
Shut-off Delay: 0.5~1s
Sensing Distance: Automatic adjustment
Flow Rate: No more than 2.0L/min at 0.1MPa.
Overtime Flowing Control: Automatically stop flushing when
the faucet senses an object for more than 1 minute
continuously
Ambient Temperature: 1~55°C
Supply Water Temperature: 0.5~71°C
Supply Water Pressure: 0.05~0.86MPa
INSTALLATION
How to Install the Faucet
1.
Secure faucet on lavatory
Install the stud (2) to the underside of the
faucet (1). Slide the gasket (3) over the
1
stud, and then seat the gasket in the groove
on the underside of the sprout. Cross power
cord (7) and water outlet hose (8) through
3
mounting hole, slide rubber washer (4),
metal washer (5) and nut (6) onto the stud
5
from under the sink. Adjust faucet power
cord and water outlet hose position, fasten
nut to secure faucet on lavatory mounting
8
surface by wrench.
2. Fasten control valve assembly Unscrew
valve cover screws (11) by screwdriver,
open valve cover (10). Determine control
box assembly (9) installation location per
rough-in; then drill holes, and punch
11
plastic expansion tube (12) in. Place valve
10
box against the wall and then mount
control valve assembly on the wall by
expansion screws (13). Keep control box
assembly parallel to the wall.
13
1495648-T2-A