AEG TR959M7SC Manuale d'uso - Pagina 34

Sfoglia online o scarica il pdf Manuale d'uso per Asciugatrice AEG TR959M7SC. AEG TR959M7SC 40.

Stampa la pagina

www.aeg.com

Error code

E50

E90 or E91

EH0

If the display shows other error codes, deactivate and activate the appliance. If the

problem continues, contact the Authorised Service Centre.

In case of different problem with the tumble dryer check the table below for possible

solutions.

13.2 Troubleshooting

Problem

You cannot activate the appliance.

The programme does not start.

Steam programme does not start. The

steam water container indicator lights up.

After a steam programme, clothes are not

sufficiently smooth.

Possible cause

Appliance motor overloaded.

Too much laundry or entrap in the

drum.

Internal fail. No communication be‐

tween electronic elements of the

appliance.

The mains supply is unstable.

The programme was not comple‐

ted. Remove the laundry from the

drum, set the programme and re‐

start the cycle.

The programme was not finished

properly or the appliance stoped

too early. Switch the appliance off

and on again.

If the error code appears again,

contact the Authorised Service

Centre.

When the appliance is showing

EH0, please wait until main supply

is stable than press start. If the ap‐

pliance pause the cycle without

any indication then press the cycle

start. If the warning will occur

check the power cord / socket in‐

tegrity or main supply.

Possible solution

Make sure that the mains plug is connected

to the mains socket.

Check fuse in fuse box (domestic installa‐

tion).

Press Start/Pause.

Make sure that the appliance door is closed.

Fill water container.

Clean the steam water filter

Note the composition of the fabric.

Set a higher steam level.

Load the machine with fewer clothes, or on‐

ly equivalent ones.

Remedy