Kohler Symbio K-1316-H Manuale di installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature per il bagno Kohler Symbio K-1316-H. Kohler Symbio K-1316-H 32. Bath whirlpool

Stampa la pagina

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before you start

installation. If you encounter any installation or performance problems, please don't hesitate to contact us. Our

phone numbers and website are listed on the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of product damage. Do not lift the whirlpool by the piping or pump, or use the piping or

pump for structural support of the whirlpool.

We recommend this whirlpool for corner installation.

Inspect the whirlpool for damage before you begin installation.

You must install this whirlpool to an adequately supported, level subfloor.

Confirm adequate support for a rim mounted faucet; large faucets that may be inadvertently used as a means of

support are not appropriate or safe for this installation.

You must have all required components (whirlpool, receptor/bench, apron, and/or end panel) at the job site

before beginning the installation.

Do not tighten hardware or secure the nailing in flanges until instructed to do so.

If you are combining this whirlpool with a receptor, bench, apron, and/or end panel, be sure to follow the

proceeding order of installation.

1. Attach the bench (if used) to the receptor, and install the receptor.

2. Install the whirlpool, and attach to the receptor.

3. Install the end panel to the whirlpool.

4. If used, install the optional apron to the whirlpool.

5. Tighten all the hardware, and secure the flanges.

6. Install the shower door to the receptor.

Recommended Tools and Materials

Silicone Sealant

Measuring Tape

Safety Glasses

Pipe Wrench

Kohler Co.

Pencil

Tin

Snips

Level

Plus:

Conventional Woodworking tools

and materials

Drop cloth

Construction adhesive (optional)

Cement or mortar (optional)

2x4's

Carpenter's

Square

1012312-2-