Kohler BRAZN K-EX22381T-SL Manuale di istruzioni per l'installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Servizi igienici Kohler BRAZN K-EX22381T-SL. Kohler BRAZN K-EX22381T-SL 8. Floor standing toilet

Stampa la pagina

Reference Value

Finished

Wall

305

400

INSTALLATION

TO REMOVE EXISTING TOILET

Turn off the water supply. Flush the toilet, and use a sponge

to remove the remaining water from the tank and bowl.

Disconnect the supply shut-off valve (if present), and remove

the old tank and bowl.

Remove the old gasket from the floor

and the closet flange with a putty knife.

Remove the old T-bolts and discard

them.

NOTICE:

if the new toilet is not

installed immediately, temporarily stuff

a rag into the closet flange.

NOTICE: Do not use white cement or high lime content

cements to install this toilet. The expansion of cement due to

a rise in temperature may make the toilet crack or cause

damage. Kohler is not responsible for any damage caused by

installation with the use of cement.

TO INSTALL SUPPLY

SHUT-OFF VALVE

Install the supply shut-off valve so it is

200mm above the finished floor line,

and 220mm to the left of the closet

flange centerline.

The centerline of the supply shut-off

valve outlet should extend 67mm from

the finished wall. Install the supply

shut-off valve with the outlet vertical.

1486239-T01-A

386

730

Supply

Reference

415.5

390

OF OUTLET

Kohler reserves the right to change marked dimensions without prior notice.

200

305/400

750

200

220

Fig.#1

Fig.#2

Closet Flange

Supply Shut-Off Valve

220

Closet Flange

Centerline

Fig.#3

-3-

FRONT OF BOWL

287

For

S305

(

)

200mm

220

Unit: mm

382

For

S400

67mm;