Kohler Englefield EVORA Back-to-Wall Manuale di istruzioni per l'installazione - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Servizi igienici Kohler Englefield EVORA Back-to-Wall. Kohler Englefield EVORA Back-to-Wall 12.
Stampa la pagina
EVORA
Back-to-Wall Toilet Suite
TM
PREPARING TO INSTALL
1
Remove the existing toilet: Turn off the water supply and flush the toilet,
then sponge out all remaining water from the cistern. Disconnect the supply
hose from the shut-off valve and remove the old pan and cistern.
CAUTION: Risk of hazardous gases. Temporarily stuff a rag in the closet
flange. Ensure this is removed before installing the new toilet.
2
Identify the type of toilet installation:
A) Side Entry with Bottom Inlet or B) Top Rear Entry with Side Inlet Valve.
For Side Entry toilets, the bottom inlet valve is supplied with the cistern.
Bottom
Inlet
Valve
Bottom
Inlet
cistern configuration
WARNING: Ensure that no part of the cistern inlet hose is submerged in water.
For Top Rear Entry installations, skip to Pan Installation on page 6.
For Side Entry/Bottom Inlet installations, proceed with instructions, below.
3
For Side Entry/Bottom Inlet installations, check the shut-off valve position.
Side entry hole
Shut-off
valve
valve position
A) Bottom inlet
Left-hand
NOTE: For shut-off valves positioned on the right-hand side,
a longer water supply hose may be required (not supplied).
INSTALLATION INSTRUCTIONS
Top Rear
Entry
Cistern
Inlet Hose
Bung
Captive
Nut
(in pan)
B) Top Rear Entry
cistern configuration
valve position
4
Side entry hole
Shut-off
valve
Right-hand
Side
Inlet
Valve
Captive
Nut
(in pan)
ENGLEFIELD