Kohler ESCALE K-24913T-GS Manuale di istruzioni per l'installazione - Pagina 30
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Servizi igienici Kohler ESCALE K-24913T-GS. Kohler ESCALE K-24913T-GS 45.
Stampa la pagina
Three. Mechanical faceplate installation
Faceplate No.:
三 . 机械面板安装方式
面板编号：
K-4177T
K-20341T
K-75891T
1. Installing the pneumatic cylinder (Packed in
mask box)
1. 气缸组件安装（方外罩包装盒内）
As shown, connect the full-flush dark gray and the half-flush
blue air hose to pneumatic cylinder, install bolt rod and nut
to pneumatic cylinder, then install to the bracket of tank.
Note: 1. M8 Bolt Rod, cut from the screw head if needed.
Remove burrs after cutting.
2. Cut the excessive parts of the air hose if necessary,
make the air hose smoothly.
如图将水箱的大冲深灰色和小冲蓝色气管连接到气缸组件，
安装螺杆及螺母到气缸组件后，将组件装入水箱支架内。
注： 1. M8 螺杆，如需要切短，切割从螺纹端开始，切割完后
去毛刺。
2. 根据实际情况将导气软管的多余部分切除，并理顺导
气软管。
2. Installing the cover
2. 遮板安装
As shown, push the cover forward until its lower surface is
attached to the hinge ear of the mask.
如图向前推动遮板，直到遮板的表面下层贴在方外罩的铰耳
上。
Note: When installing the water tank faceplate by pressing
from front, with the difference between the ambient
temperature and the water temperature greater
than 10°C, it is recommended to add a cover to
the faceplate window. Purchase the suitable model
1411859-SP separately.
注： 水箱面板前按安装，环境温度与水温相差大于 10℃ 时，
面板窗口建议增加遮板，请另购 1411859-SP。
1456149-K2-A
K-8857T
K-75890T
K-77271T
Lock
扣位
-23-
Full Flush Dark Gray Air Hose
大冲深灰色气管
Half Flush Blue Air Hose
小冲蓝色气管
Pneumatic Cylinder
气缸组件
Nut
螺母
Bolt Rod
螺杆
Cover
遮板
Hinge Ear
铰耳
Screw Head
螺纹端