Kohler Aegis LV675 Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Motore Kohler Aegis LV675. Kohler Aegis LV675 21. Kohler liquid-cooled vertical crankshaft owner's manual

Stampa la pagina

3. Unhook the element retaining strap and remove

the paper element from the air cleaner base. See

Figure 21.

Figure 21. Unhooking Retaining Strap.

4. Do not wash the paper element or use

pressurized air, as this will damage the element.

Replace a dirty, bent, or damaged element with a

new genuine Kohler element. Handle new

elements carefully. Do not use if the sealing

surfaces are bent or damaged.

5. Clean the air cleaner base area, upper blower

housing, and screen assembly of any debris

accumulation. If required, the screen assembly

may also be separated from the blower housing by

unsnapping it from the underside. See Figures 18,

19, and 20. Check all parts for wear, cracks, or

damage. Replace any damaged components.

6. Install the new paper element, Kohler Part No.

66 083 01-S and secure with the element retainer

strap.

7. Install the precleaner over the paper element,

outside the element retaining strap.

8. Reinstall the upper blower housing and screen

assembly. Secure with the four retaining straps.

Clean Air Intake/Cooling Areas

To ensure proper air circulation, make sure the air

intake screen, radiator, cooling fins, and other external

surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under

extremely dusty, dirty conditions), remove the upper

blower housing assembly. Clean the cooling fins of the

radiator, external surfaces, and the air intake screen

and blower housing assembly as necessary. The

screen assembly may also be separated from the

upper blower housing to permit more thorough

cleaning if required. See Figures 18, 19, and 20. Make

sure all parts are reinstalled before starting the engine.

If the screen assembly was separated from the blower

housing, push the upper retaining clips into the locked

position.

Clean the cooling fins of the radiator with a soft brush

or blow out using clean, compressed air. See Figure

22. Do not use a high pressure washer to clean, to

avoid damaging the cooling fins.

NOTE: Operating the engine with a blocked air intake

screen, dirty or plugged radiator cooling fins,

and/or cooling shrouds removed, will cause

engine damage due to overheating.

Figure 22. Clean Radiator Cooling Fins.