Kohler Command PRO CH26 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Motore Kohler Command PRO CH26. Kohler Command PRO CH26 21. Command series
Anche per Kohler Command PRO CH26: Manuale d'uso (21 pagine), Manuale d'uso (21 pagine), Manuale d'uso (21 pagine), Manuale d'uso (8 pagine), Manuale d'uso (14 pagine)

Stampa la pagina

Cooling

Engine Speed

NOTE: If debris builds up on the grass screen or

other cooling air intake areas, stop the engine

immediately and clean. Operating the engine

with blocked or dirty air intake and cooling

areas can cause extensive damage due to

overheating.

load.

NOTE: Do not tamper with the governor setting to

increase the maximum engine speed.

Overspeed is hazardous and will void the

engine warranty. The maximum allowable high

idle speed for these engines is 3750 RPM, no

WARNING: Hot Parts!

Engine components can get extremely hot from

operation. To prevent severe burns, do not touch these

areas while the engine is running, or immediately after

it is turned off. Never operate the engine with heat

shields or guards removed.

Frequency

Daily or Before

Starting Engine

Maintenance Instructions

Maintenance, repai5 or replacement of the emission control devices and systems, which are being done at

the customers expense, may be performed by any non-road engine repair establishment or individual,

Warranty repairs must be performed by an authorized Kohler service outlet,

WARNING: Accidental Starts!

DisabHng engine. Accidenta/staHing can cause severe injury or death. Before working on the engine or

equipment, disable the engine as follows:

Disconnect the spark plug lead@). 2) Disconnect negative (-) battery

cable from battery.

Maintenance Required

Fill fuel tank.

Check oil level.

Check air cleaner for dirty', loose, or damaged parts.

Check air intake and cooling areas, clean as necessary'.

Maintenance Schedule

These required maintenance procedures should be performed at the frequency stated in the table. They should

also be included as part of any seasonal tune-up.

Every 2 5 Hours

Every 700 Hours

Hours

Every250 Hours

Service precleaner element'.

Replace air cleaner element'.

Change oil. (More frequently under severe conditions.)

Remove cooling shrouds and clean cooling areas',3.

Check oil cooler fins, clean as necessary (if equipped).

Check spark plug condition and gap.

Change oil filter.

Replace heavy-duty air cleaner element and check inner element'.

Every 500 Hours

Every 7500 Hours

Annually or

Have bendix starter drive serviced2.

Every 500 Hours

Have solenoid shift starter disassembled and cleaned2.

Have crankshaft spline lubricated2.

Replace fuel filter' (EFI engines).