Kohler K301 Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Motore Kohler K301. Kohler K301 17. 3/4 inch high-flow deck/rim mount bath valve
Anche per Kohler K301: Manuale d'uso (14 pagine), Manuale di installazione (40 pagine), Manuale d'uso (17 pagine), Manuale d'uso multilingue (8 pagine)
- 1. Safety Precautions
- 2. California Proposition 65 Warning
- 3. Oil Recommendations
- 4. Cold Weather Starting Hints
- 5. Maintenance Instructions
- 6. Maintenance Schedule
- 7. Carburetor Troubleshooting and Adjustments
- 8. Troubleshooting
- 9. Parts Ordering
- 10. Major Repair
- 11. Model Designation
- 12. Specifications
Storage
If the engine will be out of service for two months or
more, use the following
storage procedure:
1 .
2 .
Clean the exterior surfaces of the engine.
Change the oil and filter while the engine is still
warm from operation.
See "Change Oil" on
page 8.
3 . Change oil in reduction gear unit, if so equipped.
Refill with the same oil as used in engine
crankcase
for season of operation.
See page 8.
4 . The fuel system must be completely
emptied, or
the gasoline must be treated with a stabilizer to
prevent deterioration.
If you choose to use a
stabilizer,
follow the manufacturers
recommendations,
and add the correct amount
for the capacity of the fuel system. Fill the fuel
tank with clean, fresh gasoline.
Run the engine
for 2-3 minutes to get stabilized
fuel into the
carburetor.
To empty the system, run the engine until the fuel
tank and system are empty.
5 . Remove the spark plug. Add one tablespoon
of
engine oil into the spark plug hole. Install the
plug, but do not connect the plug lead. Crank the
engine two or three revolutions.
6
Remove the spark plug. Cover the spark plug
hole with your thumb, and turn the engine over
until the piston is at the top of its stroke.
(Pressure against thumb is greatest.)
Reinstall
the plug, but do not connect the plug lead.
7
Store the engine in a clean, dry place.
Parts Ordering
The engine Specification,
Model, and Serial Numbers
are required when ordering replacement
parts from
your Kohler Engine Service Dealer. These numbers
are found on the identification
plate which is affixed to
the engine shrouding.
Include letter suffixes if there
are any. See "Engine Identification
Numbers" on
page 5.
Always insist on genuine Kohler parts. All genuine
Kohler parts meet strict standards
for fit, reliability,
and performance.
Major Repair
Major repair information
is available
in Kohler Engine
Service Manuals.
However, major repair generally
requires the attention of a trained mechanic and the
use of special tools and equipment.
Your Kohler
Engine Service Dealer has the facilities,
training,
and
genuine Kohler replacement
parts necessary
to
perform this service. For Sales & Service assistance
call I-800-544-2444
(U.S. & Canada) or contact your
Kohler Engine Dealer or Service Distributor,
they're in
the Yellow Pages under Engines-Gasoline.
Model Designation
The model number designates
the cubic inch
displacement
and the number of cylinders
- Model
K241A, for example designates
24 cubic inch
displacement,
1 designates
single cylinder. The letter
suffix designates
a specific version as follows:
Suffix
A
EP
P
Q
R
S
T
Designates
Oil Pan Type
Generator
Set
Pump Model
Quiet Model
Gear Reduction
Electric Start
Retractable
Start
14