Kohler 1.4BEOR-12V Funzionamento - Pagina 28

Sfoglia online o scarica il pdf Funzionamento per Generatore portatile Kohler 1.4BEOR-12V. Kohler 1.4BEOR-12V 44. Heavy duty truck mobile generator sets

Stampa la pagina
5.3.5
Fuel Filter Replacement
Use the following procedure to replace the fuel filter.
1. Unlock the front access panel of the power unit
enclosure with the supplied plastic key.
Figure 5-5.
2. Turn the master switch (see Figure 5-6) to the OFF
position.
3. Remove the screw and remove the fuel filter clamp.
Save these parts to reuse during reassembly.
Remove the fuel filter from the power unit
enclosure. See Figure 5-13.
7
5
1
2
1. Fuel hose
2. Clamp
3. Fuel filter
4. Fuel filter clamp
Figure 5-13 Fuel Filter Components
4. Remove the clamps from the fuel hoses. See
Figure 5-13.
Note: DO NOT pollute the environment. Dispose
of used engine oil and other contaminants in
a safe, approved manner.
5. Remove the used fuel filter and replace with a new
one.
6. Replace the hoses into the fittings on the fuel filter
and reattach the clamps using pliers to fasten. See
Figure 5-14.
7. Replace the clamp around the fuel filter and fasten
it to the support pin on the engine using the screw.
28
Section 5 General Maintenance
See
1
2
6
3
4
tp6576
5. Screw
6. Power unit enclosure
7. Support pin on the
engine
1
2
1. Hose
2. Fuel filter
Figure 5-14 Fuel Filter

5.4 Air Filter

Servicing the air cleaner. A sudden backfire can cause
severe injury or death. Do not operate the generator set with
the air cleaner removed.
Use the following procedure to clean or replace the air
filter.
1. Unlock the front access panel of the power unit
enclosure with the supplied plastic key.
Figure 5-5.
2. Turn the master switch (see Figure 5-6) to the OFF
position.
3. Remove the air filter cover by turning the knob
counterclockwise. See Figure 5-15.
1
1. Air filter cover
2. Knob
Figure 5-15 Accessing Air Filter
1
tp6576
See
2
tp6576
TP-6687
9/10