Kohler 18RESL Manuale operativo - Pagina 15

Sfoglia online o scarica il pdf Manuale operativo per Generatore portatile Kohler 18RESL. Kohler 18RESL 48. Residential/commercial generator sets
Anche per Kohler 18RESL: Manuale di installazione (40 pagine), Funzionamento (48 pagine)

Stampa la pagina

2.1 Prestart Checklist

To ensure continued satisfactory operation, perform the

following checks or inspections before or at each

startup, as designated, and at the intervals specified in

the service schedule. In addition, some checks require

verification after the unit starts.

Air Cleaner. Check for a clean and installed air cleaner

element to prevent unfiltered air from entering the

engine.

Air Inlets. Check for clean and unobstructed air inlets.

Battery. Check for tight battery connections. Consult

the battery manufacturer's instructions regarding

battery care and maintenance.

Exhaust System.

Check for exhaust leaks and

blockages. Check the muffler condition and check for

tight exhaust system connections.

Inspect the exhaust system components for cracks,

leaks, and corrosion.

Check for corroded or broken metal parts and replace

them as needed.

Check that the exhaust outlet is unobstructed.

Oil Level. Maintain the oil level at or near, not over, the

full mark on the dipstick.

Operating Area. Check for obstructions that could

block the flow of cooling air. Keep the air intake area

clean. Do not leave rags, tools, or debris on or near the

generator set.

TP-6517 1/11

Section 2 Operation

2.2 DC-RET Controller

Figure 2-1 illustrates the DC-RET LED display and

controls on the generator set junction box.

2.2.1

Generator Set Master Switch

The generator set master switch is located on the

junction box below the DC-RET display. The master

switch positions are RUN, OFF/RESET, and AUTO.

See Section 2.4 for operation instructions.

1. LED display

2. Generator set master switch (RUN-OFF/RESET-AUTO)

3. Line circuit breaker

4. Fuses

5. RS-232 connector (for application program upgrade)

Figure 2-1 DC-RET Controls

tp6517

Section 2 Operation