Kohler DC2 Manuale di installazione - Pagina 26

Sfoglia online o scarica il pdf Manuale di installazione per Generatore portatile Kohler DC2. Kohler DC2 44. Residential/commercial generator sets
Anche per Kohler DC2: Manuale di installazione (48 pagine), Funzionamento (20 pagine)

Stampa la pagina
Kohler DC2 Manuale di installazione
Generator Set
NOTES:
D See Figure 1-6 for terminal block location on generator set. Check
the decal on the generator set for terminal block connections.
D See Figure 1-21 for maximum total cable length per run (3 runs
with 1 module each shown).
D See Figure 1-22 for communication connection detail (A and B,
PWR and COM).
D Use splices or wire nuts to collect multiple leads for connection to
the generator set terminal block. See Figure 1-24.
1. Belden #9402 or equivalent, 20 AWG shielded cable with 2 twisted pairs
Figure 1-23 Accessory Module Connections (three cable runs with one module each)
Generator Set
Generator Set Terminal Block TB1.
See Figure 1-6 for location. Check the decal on
the generator set for terminal block connections.
1. Splice
Figure 1-24 Multiple Connections to the Generator Set
26
Section 1 Installation
TB1
A
RBUS
B
PWR
12 VDC
COM
4
3
TB1
1
1
1
Connect all of the shield leads on this
end to GROUND at the generator set.
1
TO GROUND
RXT ATS
LCM
PIM
tp6809
A
B
9402 CABLE
PWR
COM
A
B
9402 CABLE
PWR
COM
tp6809
TP-6803 12/11