Kohler K-2452 Manuale del proprietario di casa - Pagina 5

Sfoglia online o scarica il pdf Manuale del proprietario di casa per Arredamento per interni Kohler K-2452. Kohler K-2452 40. Vanity

Remove/Adjust the Door(s) and Hinges (cont.)

Depth - to move the door in or out - Loosen the screw on the

bottom and top hinge assembly, hold the door in the desired

position, then retighten the screws.

Hinges

Removal:

For a bottom hinge -

Remove the cover plate from the hinge base by sliding the cover

plate out toward you, then away from the hinge base.

For a top hinge -

Refer to the "Remove/Adjust the Slow-Close Assembly" section,

then proceed with the following instructions.

For both hinges -

Remove the two screws from the hinge cup, then the two screws

from the hinge base.

Relocate for left-pivot:

For vanities with a single door only - Install the hinges to the

pre-drilled holes on the left side of the door opening on the

vanity. Turn the door 180°, then reinstall the door to the hinges

on the vanity.

Replacement/Reinstallation:

Align the hinge base with the pre-drilled screw holes on the side

of the vanity. Secure with two screws.

Align the hinge cup with the pre-drilled screw holes on the door.

Secure with two screws.

Line up the latch pin on the hinge cup with the groove on the

hinge base, then snap into place.

Reinstall the cover plate and hinge assembly.

Kohler Co.

1049900-5-D