Kohler VERDERA K-26382T Istruzioni per l'installazione - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Arredamento per interni Kohler VERDERA K-26382T. Kohler VERDERA K-26382T 4. Mirrored cabinet
Stampa la pagina
STEP2: Install the mounting bar. Place it level and fix it.
The number of screw holes is based on the actual product.
安装步骤二：安装托条， 水平放置并固定。 螺钉孔数量以实物
为准。
Installation and Adjustment of Accessories 配件安装及调节
STEP1: Install the clips. Insert the shelves between the clips.
Insert the glass shelf into the snap-in pins, insert the glass
shelf vertically upwards and then rotate to horizontal position.
安装步骤一：安装夹子， 将层板玻璃垂直插入层板夹， 再旋转水
平后推入另一排层板夹中。
Installation of Side Mirror
STEP1: Align the brackets with the mounting holes.
安装步骤一：将支架与安装孔对齐。
1421038-T01-A
3
2
1
STEP3: Fix the cabinet
安装步骤三：固定柜体
1. Put the cabinet on the mounting bar.
1. 将柜体放在托条上。
2. Insert top clips from the center of the top.Slide the clips to
align with the drilled holes. Fix with screws. (Only K-26382T
has a gap, the rest have been pre-installed with the clips)
2. 从中间缺口嵌入顶扣在柜顶，滑动顶扣，对准上一步骤的钻孔后，
用螺钉固定。（仅K-26382T有缺口，其余出厂已经装好顶扣)
STEP2: If needed, align the door.
安装步骤二：若有需要， 可对柜门进行调整。
侧镜安装
STEP2: Secure the brackets with the round-headed short screws.
安装步骤二：用圆头短螺钉将支架固定。
Note: When installed by cabinet splicing, side mirrors need
not be installed on the cabinet side.
注意：拼柜安装时，拼柜侧不用安装侧镜。
-3-
Top Clip
顶扣
Cabinet
柜体
Mounting Bar
托条