A-TOUCH W-Thermo Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Termostato A-TOUCH W-Thermo. A-TOUCH W-Thermo 15.

Stampa la pagina

1 START

06-00H20

STOP

06-06H20

STOP

06-09H20

TEMP.

06-09H20

TEMP.

06-09H22

2 START

00-00H20

Repeat the same procedure for periods 2 and 3. Once you confirm the temperature

of the third period, you go to the week day Tuesday menu:

WEEK DAY

TUESDAY

COPY

EDIT

1 START

00-00H20

TEMP.

06-09H22

WEEK DAY

WEDNESD

COPY

WEEK DAY

WEDNESD

Repeat the procedure for every week day. When you reach Sunday and confirm the

last setting, then you will access the Summer Program menu. The procedure is

exactly the same as for the winter program.

Notes:

If the starting hours of one period are the same as the stopping hours then

the period does not work (unit is off).

You can define one period as 0 to 24 hours: this will work the whole day.

Periods can overlap: in winter mode the highest temperature prevails, in

summer mode the lowest temperature prevails.

It is not mandatory that you define all the operation periods for a certain

day. However, in order for the program to be stored, you must confirm all

the 3 periods completely: just keep the start and stop times equal and the

period will not work.

SELECT UNIT

HEATER

SELECT HEATER AND COLLER UNIT

It is possible that one single thermostat panel controls 2 different climatization

machines. In that case, one actuator controls for example the radiating floor and

another actuator controls for example the air conditioning.

The unit defined as LOCAL is the actuator that is connected to the thermostat

panel; the other unit is then the REMOTE actuator.

The REMOTE unit has to be programmed to operate as SLAVE of the LOCAL unit.

Please see the chapter USING 2 UNITS WITH 1 THERMOSTAT for more details.

[email protected]

Confirm by pressing key

- now you can adjust the starting hours of the first period.

Change with key

(UP) or

Confirm by pressing key

- now you can adjust the finishing hours of the first period.

Change with key

(UP) or

Confirm by pressing key

- now you can adjust the temperature of the first period.

Change with key

(UP) or

Confirm by pressing key

- now you can adjust the starting hours of the second period.

- the display shows the week day Tuesday. You can select another

day if you like by pressing key

Confirm by pressing key

- now you can choose between copying the previous week day

settings or edit this day. To edit this day press key

- the display shows EDIT. Now press key

- the display shows the settings for the first period. The procedure is

as explained for Monday. Once you confirm the temperature of the

third period, the display shows the next week day.

Confirm by pressing key

- now you can choose between copying the previous week day

settings or edit this day. If you wish to copy just press key

(ENTER):

- the settings are copied and you can edit the next day.

When you finish defining the last week day of the summer period, the

display will show the next menu item.

(ENTER):

(DOWN)

(ENTER):

(DOWN)

(ENTER):

(DOWN)

(ENTER):

(UP) or

(DOWN).

(ENTER):

(DOWN):