Aqua Comfort Heat pump pool heater Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Riscaldatore per piscina Aqua Comfort Heat pump pool heater. Aqua Comfort Heat pump pool heater 16.
ELECTRONIC CONTROL PANEL
DIGITAL DISPLAY
Displays actual Pool/Spa
temperature. In select mode
displays other parameters.
SELECT/SERVICE KEY
Used to select mode of
operation and enter service
mode.
MODE SELECTION
Selecting the desired mode of operation is accomplished by pressing the SELECT KEY.
TEMPERATURE SETPOINT
• Temperature setpoint maximum for POOL mode is 95°F (35°C).
• Temperature setpoint maximum for SPA mode is 104°F (40°C).
• Disconnect all power sources before performing any maintenance or service to the heater.
To change the temperature setpoint, press the SELECT KEY until you reach either POOL or SPA. Press either
the UP or DOWN key to scroll to your desired temperature setpoint. Once your new temperature setpoint has
been reached, release the UP or DOWN key. Your new setpoint will be displayed for five seconds, then revert
back to the actual pool or spa water temperature.
SELECTING POOL OR SPA MODE
Press the SELECT KEY until you reach P_S. Pressing the UP or DOWN key will allow you to enter either
POOL or SPA mode. LED indicator lights will verify the mode selected.
HEAT & COOL MODELS ONLY:
Selecting Heat or Cool
Press the SELECT KEY until you reach PHC. Pressing the UP or DOWN key will allow you to choose P_H for
Pool Heat or P_C for Pool Cool. NOTE: UNIT WILL ONLY COOL IN THE POOL MODE.
...................................................................................................................................................................................................................
..........................................................................................................................................................
OWNER'S MANUAL
POOL LED
Indicates Pool Mode
ON LED
Indicates Compressor is On
SPA LED
Indicates Spa Mode
INCREASE KEY
DECREASE KEY
8