Aqua Computer D5 Manuale di avvio rapido - Pagina 4

Sfoglia online o scarica il pdf Manuale di avvio rapido per Hardware del computer Aqua Computer D5. Aqua Computer D5 8.

Stampa la pagina

Aqua Computer D5 Manuale di avvio rapido

ULTITUBE D5

3.3. RGBpx LED ring

3.3.

RGBpx LED ring

For effective illumination of the reservoir, a RGBpx LED ring is available (product

code 34115, included in ULTITUBE D5 PRO only).

The LED ring consists of a transparent silicone ring and a black rubber LED holder.

For installation, slide the silicone ring over the top of the reservoir to your pre-

ferred position on the glass tube. Insert the rubber LED holder into the silicone

ring.

Connect the LED ring (connector marked with the word "IN") to a compatible

RGBpx output of an Aqua Computer device. A suitable cable is included in deliv-

ery. If required, additional RGBpx components can be connected (daisy chained)

to the adjacent connector (connector marked with the word "OUT").

3.4.

3.4. Disassembly and reassembly of the reservoir lid for filling

Disassembly and reassembly of the reservoir lid for filling

To remove the lid, hold the glass tube and turn the lid counter-clockwise. Take

care not to lose the gasket. For reassembly, place the gasket onto the glass tube

and screw the lid onto the reservoir. Do not use any tools and use only moderate

force.

3.5.

3.5. Integration into the cooling loop

Integration into the cooling loop

3.5.

Integration into the cooling loop

Connect the return line to the reservoir connector engraved with the word "IN"

and connect the other line to the remaining connector. Use light force only when

screwing in fittings in order not to damage the threads in the plastic base part!

4. 4. 4. 4. D5 NEXT

D5 NEXT

This chapter applies to variants with D5 NEXT pump only (product numbers 34100,

34109, 34110).

4.1. Detachable control unit, mounting options

4.1.

Detachable control unit, mounting options

4.1.

Detachable control unit, mounting options

The controller unit of the pump can be removed by pulling it off the pump motor

unit in a straight line. Make sure that no power is supplied to the pump whenever

the controller unit is being removed from or re-attached to the pump motor unit!

The controller unit can only be attached to the pump motor unit in a given orienta-

tion. Do not use excessive force but re-check the orientation if you encounter

problems re-attaching the controller unit.

The orientation of the display can only be adjusted by rotating the entire pump. In

order to rotate the pump, the mounting ring attaching the pump to the reservoir

needs to be unscrewed, which can result in coolant leakage! Completely drain the

coolant before loosening the mounting ring and remove the controller unit from

the pump! After rotating the pump, re-fasten the mounting ring by hand.

- 4 -

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen

aqua

computer