Aqua Computer cuplex kryos NEXT VARIO Manuale operativo e di montaggio

Sfoglia online o scarica il pdf Manuale operativo e di montaggio per Distributore d'acqua Aqua Computer cuplex kryos NEXT VARIO. Aqua Computer cuplex kryos NEXT VARIO 4.

Stampa la pagina

aqua

computer

Operating and assembly manual

1. Preparation

Back up your data before modifying your hardware! Disconnect your PC from

the mains power outlet. To prevent damaging the sensitive hardware compo-

nents, make sure to ground your workplace and yourself to prevent electrostat-

ic discharges.

When upgrading an existing PC setup, remove the installed heat sink from the

CPU. Refer to the instruction manual of the CPU cooler for details. Remove

thermal grease residues from the CPU surface using benzine if necessary.

Place a small drop (diameter ca. 4 mm or 0.15 inch) of thermal grease sup-

plied with the cuplex kryos NEXT centrally on the CPU. Alternatively, you can

apply a thin layer of the thermal grease using the supplied plastic spatula.

2.1. Instructions for Socket 2011-3, 2011, AM4

Place the cuplex kryos NEXT on top of

the thermal grease covered CPU, ob-

serving the orientation as shown in the

picture. Place on spring into each re-

cess and insert a knurled screw

through each spring into the anchor

threads of the CPU socket (only one or

two revolutions). Alternately fasten

each screw a fraction of a revolution

until all four screws are fully fastened.

cuplex kryos NEXT

Aqua Computer GmbH & Co. KG – Gelliehäuser Str. 1 – D-37130 Gleichen

cuplex kryos NEXT VARIO 04/2017