AAVIX GC-1032 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Metal Detector AAVIX GC-1032. AAVIX GC-1032 15.

OPERATION

1. TURNING ON THE DETECTOR

Rotate the VOLUME switch clockwise away from OFF to power on

the detector. LCD will display all symbols .Meanwhile the detector

sounds low , medium, high tones respectively. After about 2 seconds

the detector enters into stand-by state. At this time the default mode

is DISC. LCD displays DISC of 00 and SENS of 6 bars.

2. TESTING AND USING THE DETECTOR

To learn how the detector reacts to different metals, you should test it

before you use it the first time. You can test the detector indoors and

outdoors.

1. Rotate the VOLUME switch clockwise away from OFF to power on

the detector.

2. Setting the operating mode:

(1) DISC: Press DISC, then + or – to set the DISC numeric value. If

the DISC value is set to 00, the detector can detect all metals. If

you want to find one of the target material listed on the LCD,

you can set the relative numeric range of DISC by pressing

DISC then + or -. For example, the numeric range for 5¢ is 6-17,

you can simply press DISC, then set the DISC number to 7 or

10 by pressing + or -. If the detector finds a coin of 5¢, the

cursor above 5¢ will light.

Note:

1. It is recommended to select the lower or medium

value of the numeric range. Because if you select a

top value, you might miss the target below the

selected value.

2. If you don't press the buttons (DISC,+,-) within about

2 seconds, the detector will enter the standby state.

(2) NOTCH: