Aqua Control AQUATIC 2HP FUSION Series Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Fontana da esterno Aqua Control AQUATIC 2HP FUSION Series. Aqua Control AQUATIC 2HP FUSION Series 14.
Stampa la pagina
A6
Parts Needed:
Nozzle Base
x 1
Bolt
x1
1. Remove Flare from Nozzle Base:
2. Install Flow Stoppers to the Nozzle Base:
Insert 12x Flow Stoppers into the bottom of
the Nozzle Base, secure with 12x screws
3. Attach the Nozzle Base
Stack 11 Washers in the cup
of the Outflow
Secure the Nozzle Base to the
unit using the bolt that goes
through the center hole
Fusion Series:
TORNADO
.6 Nozzle Tip
x 1
Screw
x14
Remove the Flare from the Nozzle base, set aside.
Flow Stopper x12
1.25 OD Washer
x11
(Save for use with other patterns)
Finally secure the Center
(.6)Nozzle Tip with the plug
inserted to the Nozzle base
using 2x screws
Make sure Rubber Plug is
inserted into the bottom of
the .6 Nozzle Tip
Rubber
Plug x1