AVLink HDM-GENW2 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Estensore AVLink HDM-GENW2. AVLink HDM-GENW2 2. Hdmi 4k cascading extender with poc

Stampa la pagina
Front View
HDM-GLNW
1. DC 12V
2. HDMI IN
3. LOOP OUT
4. LINK OUT
LED Indicator
Status
Yellow
Solid
The chip is working.
The HDMI signal is
Green
Blinking
5. IR OUT
HDM-GRNW
1. DC 12V
2. HDMI OUT
3. IR IN
4. LINK IN
LED Indicator
Status
Yellow
Solid
The chip is working
The signal from the
Green
Blinking
previous-level unit is
5. LINK OUT
LED Indicator
Status
The display device
Yellow
Blinking
The output signal
Green
Solid
-4-
Diagram
(1) Point-to-point connection, using a single CAT5e / 6 cable
extension up to 50 meters.
(2) Multi-receiver Cascade
Description
■
Cascade to 2 levels (HDM-GENW: 1 x HDM-GLNW +
2 x HDM-GRNW) with PoC function and support
video resolutions up to 4K/60Hz.
inputting.
■ Cascade to 4 levels (Max.) (1 x HDM-GLNW + 4 x
HDM-GRNW with power adaptor / each unit) and
support video resolutions up to 4K/30Hz.
Description
working.
Description
is connected.
is working.
※Precautions※
IR Receiver Cable Directions:
Put it into the HDM-GRNW "IR IN" port and place the IR
Receiver Cable, so that you can point to it easily with your
IR remote controller.
IR Blaster Cable Directions:
Plug the IR blaster cable plug into the HDM-GLNW "IR
OUT" port, It sits in front of the DVD receiver's IR sensor,
which is located on the front-panel.
© AV LINK GROUP LTD., All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to in this manual are trademarks or registered
trademarks belonging to their respective companies.
-5-
Please note that the resolution used by the product
cannot exceed the product parameters.
It is recommended to use shielded network cables in
poor environments.
The input and output HDMI cables cannot exceed 3
meters.
The input voltage cannot exceed 12V when using the
supplied adapter.
-6-