AVLink 100.570UK Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie AVLink 100.570UK. AVLink 100.570UK 2. True wireless bluetooth earphones & power dock

Pairing with your device on first use

Press and hold the control buttons on both earbuds for around 5 seconds until the LED indicators illuminate and flash blue and red.

The earbuds will 'pair' with one another and the LED indicator on the right earbud will go out, accompanied by a voice message saying

"connected". The left earbud will remain in pairing mode. Ensure your device has Bluetooth activated and is set as 'discoverable'.

Refresh your device's pairing list and select AV:LINK-TWE1. When the earbuds have paired with your device, there will be a voice

message saying "pairing successful", and the LED indicators on both earbuds will intermittently flash blue.

Disconnecting and reconnecting to your device

To disconnect and switch off the earphones, press and hold the control button on either earbud until the LED indicator turns red. Both

earphones will switch off at the same time. To reconnect to the same device, press and hold the control buttons on both earbuds for

2-3 seconds, until the LED indicators turn blue. The earphones will pair to your device automatically and a voice message saying

"connected" will be heard, followed by "left channel" and "right channel" in each corresponding earbud.

Play/pause

To play or pause the current track, short-press the control button on either earbud.

Hands-free operation

When you receive a phone call during audio playback, a voice message saying "incoming call" will be heard, along with the caller's

telephone number. To accept the call, press the control button on the left earbud once. To reject the call, press the control button on

the left earbud twice. When you have completed the call, hang up by pressing the control button on the left earbud once.

Charging the earbuds

To charge the earbuds, carefully place them – button-side up – in the magnetic ports of the power dock. The LED indicators will glow

red, indicating that charging is taking place. When charging is complete, the LED indicators will intermittently glow blue. To fully

charge the earbuds from 'flat' takes around 90 mins. On removing the earbuds from the dock after charging, they will automatically

switch on and pair with your device. Please ensure you switch them off if you aren't intending to use them!

The Power Dock

The power dock is a compact, magnetic carry case and power bank, with capacity to fully recharge the earphones up to 7 times. To

charge the power dock, connect it to a compatible USB power socket using the USB cable provided. Blue LED power indicators on the

side of the dock will flash to indicate how much power is available: from 1 x LED for low power to 3 x LEDs for full power. When

charging the earbuds, the blue LED power indicators on the side of the dock will glow to indicate how much charge is available. When

the earbuds are fully charged, the lights will go out.

FAQ

Q) The Bluetooth earphones will not pair with your device. A) Check that the earphones are in pairing mode; Bluetooth is enabled on

your device; and the device is set as 'discoverable'.

Q) The Bluetooth earphones disconnect with my device within the stated 10m transmission distance. A) The maximum transmission

distance stated is dependent on a clear line of sight between the earphones and your device. If there are large metallic objects or

other devices transmitting radio or wireless signals in the vicinity, they may impact on the reception of the earphones.

Q) The Bluetooth earphones won't reconnect with my device. A) On occasion, your Bluetooth device or the earphones may enter a

locked state and need resetting. To do this, find the earphones in your device list and select "forget this device". Then, refollow the

instructions for "Pairing with your device on first use", above.

Safety Disclaimer

Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock or equipment damage

and will also invalidate the warranty. This product is only designed for indoor use and must be kept away from water and high humidity

along with high temperatures and direct sunlight.

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its

useful life. The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.