AVLink PBH10 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie AVLink PBH10. AVLink PBH10 2. Wireless bluetooth headphones

4. Next track/volume up

While in Bluetooth or MP3 mode short-press to move to the next track and long-press to increase the

volume.

5. Power/play/pause/pair

Press and hold this button for 2-3 seconds until an audible alert for on/off is heard. By default the PBH10

will go into Bluetooth pairing mode and the LED indicator will flash blue and green. Once Bluetooth

connection has been made a constant blue light will be displayed. If you need to pair again press and hold

the button for 2-3 seconds. If you are asked for a pairing code the device is listed as AV:Link-PBH10 and

the code is 0000. While in Bluetooth or MP3 mode short-press to play and pause the current track. While

in FM radio mode short-press to perform a channel scan before selecting your desired channel.

6. Micro USB port

Insert the USB cable provided to charge the unit. On first use please ensure you fully charge the

headphones. Whilst charging the LED will glow red and once it's fully charged it will go out. On low power

the LED will flash red, please recharge the unit at this point.

7. 3.5mm jack port

Also provided with the unit is a 3.5mm jack cable which can be used with the headphones by connecting

to any device with a 3.5mm socket.

8. Micro SD card slot

Insert a micro SD card for use in MP3 mode, the maximum capacity is 32MB.

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at

the end of its useful life. The goods must be disposed of according to your local council guidelines.

Controls & Functions

1. Phone connect/disconnect

When in Bluetooth mode; press this button to answer an

incoming call or hang up when you have finished. Alternatively

long-press this button while content is playing and it will

automatically call your last logged number. If you receive a call

while content is playing, the unit will pause your current track

and allow you to answer or reject the call. On completion of the

call it will continue playing your current track.

2. MODE/EQ

Long-press to alternate between Bluetooth FM or MP3 mode.

Please note MP3 mode will only function when a micro SD card is

inserted. While any content is playing short-press to use the

equalizer function and alternate between

natural/pop/rock/jazz/classical/bass-boost modes.

3. Previous track/volume down

While in Bluetooth or MP3 mode short-press to go back a track

and long-press to decrease the volume.

Errors and omissions excepted.

Wireless Bluetooth® Headphones User Manual