Avlite AV23 Manuale di installazione e assistenza - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione e assistenza per Apparecchiature di illuminazione Avlite AV23. Avlite AV23 20. Solar obstruction light

Stampa la pagina
Pulse settings on Avlite lights operate via DIP switches, located near the rotary switches on the flasher
unit. The pulse settings may be used to reduce the power consumption and intensity of the light.
Setting the light to 25% pulse will reduce the power consumption to 25% of the normal 100% setting
and the range by 50%. This setting may be used to adjust to local sunlight conditions.
The following diagrams indicate pulse settings:-
ON
ON
1
2
1
100%
75%
Power Consumption Calculator
Night Hours
(use 13.7 if
unknown)
X
Total power
used per night
(mA)
/ 456 =
If the number of Full Sunlight hours is greater than 3-3.5 hours, please consider reducing the intensity
(Power) or reducing the Duty Cycle.
Selecting a Flash Code - Rotary Switches A & B
All lights have 2 rotary switches marked A and B on the flasher unit. Turning the small arrows to the
appropriate number or letter will set the code (see 'Flash Codes' section, of this manual). The unit may
take up to one minute to activate a new flash code. A comprehensive list of available flash codes is
listed on pages in the 'Flash Codes' section of this manual.
Example:
SWITCH FLASH CODE
A
B
A
0
FL 3 S
Latest products and information available at www.avlite.com

Selecting an Intensity/Power Setting

ON
2
1
2
50%
Power
mA/hour
X
Solar Panel
Charge
ON
OFF
0.3
2.7
AV23 Solar Obstruction Light
ON
1
2
25%
Duty Cycle
(e.g. 20% = 0.2)
Number of Full Sunlight
hours required to
recharge battery
8
Intensity
Power
Setting
mA / hour
100%
100
75%
76
50%
51
25%
26
Total power
used per night
(mA)
=
B
A