ab Naida CI Q70 Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Apparecchi acustici ab Naida CI Q70. ab Naida CI Q70 13. Tools for schools sound processor
Stampa la paginaBilateral Initialization
It is no longer necessary to label processors as right side and left side. The Naída CI sound processor can detect which ear
it is worn on automatically and provide access to the appropriate programs for that ear (the feature must be activated by
an audiologist).
INDICATORS FOR STATUS CHECK AND TROUBLESHOOTING
Tri-Color Light Emitting Diode (LED)
The Naída CI is equipped with a built-in Light Emitting Diode (LED) Status
Indicator. The LED is a diagnostic light that provides caretakers and teachers
with information regarding the functionality of the Naída CI. The LED is located
in the middle of the Volume Control and can be programmed to provide the
following information:
Naída CI Q70 Sound Processor LED Indications
Color
Behavior
Blinks at start-up
Orange
Solid
Blinks twice every three seconds
Fades out
Blinks once per second
Blinks rapidly
(more than once per second)
Solid
Red
Blinks five times
Flickers in response to loud inputs
Blinks at start-up, after battery
status, and upon program change
Green
Solid
Blinks four times
Intellilink™ Safety Feature
Intellilink is an important safety feature for AB recipients that ensures a sound processor only stimulates the correct internal
device. It prevents accidental stimulation from a processor that attempts to communicate with the incorrect implant.
Tools for Schools™ Program Resources
4 quick blinks indicate that the battery is fully
•
charged
2 - 3 quick blinks indicate that the battery is
•
sufficiently charged to power the Naída CI
The battery is almost depleted
The battery is almost depleted and cannot support stimulation (Sleep Mode)
The Naída CI is entering Standby Mode
Loss of lock with the implant
Intellilink™ feature enabled and the Naída CI is connected to the wrong
Sound processor error condition. Fully remove and re-insert the battery to reset processor
Response to the AB myPilot remote control request to 'Find Paired Devices'. The Right paired device will
identify itself with this LED pattern.
The sound processor and microphone are responding to sound
1 blink indicates program one
•
2 blinks indicate program two
•
3 blinks indicate program three
•
A processor that is not yet programmed
Response to the AB myPilot request to 'Find Paired Devices'. The Left paired device will identify itself with this LED
pattern.
Feature
Battery Status
Microphone Status
Program Position
CI Status
Indication
1 quick blink indicates that the battery is nearly
•
depleted
No blinking indicates depleted battery. Replace with
•
charged or new battery
implant
4 blinks indicate program four
•
5 blinks indicate program five
•
Color
Orange
Green
Green
Red