A.H.Beard Genius Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Prodotti per la cura della persona A.H.Beard Genius. A.H.Beard Genius 20. Adjustable base

installation guide

STEP 1

Place the bed base box in a desired location with the bottom of the

box facing up .

Remove the binding straps and packing materials, making sure not

to puncture the box with any sharp objects .

STEP 2

Remove the bed base from the box keeping the bottom of the base

facing upwards .

STEP 3

To install optional headboard brackets: See detailed installation

instructions on page 13.

To install the legs, thread the washer over the bolt of the leg with the

recessed side facing the leg, and tighten by hand . Do not over tighten.

Always use two people when setting up the base.

For customer support, visit www.ahbeard.com or call: 1300 654 000

STEP 4

To sync two bases with the SmartSync™ cord - see page 15.

Uncoil the Power Down Box from the frame

and install (2) 9 Volt batteries- not included .

Place box on the ground . Ensure that it is

easily accessible when the base is turned to

its upright position .

STEP 5

Uncoil input cord (connected to control box's

power port) and plug into Power Supply .

STEP 6

Uncoil the Power Cord and connect to the

Power Supply . Place Power Supply on the

ground and extend from the base . Ensure that

the Power Supply and all attached cords are

directed toward the desired surge protector .