Aqua Creek Products Ranger 2 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Apparecchiature di illuminazione Aqua Creek Products Ranger 2. Aqua Creek Products Ranger 2 16. Pool lift
Anche per Aqua Creek Products Ranger 2: Manuale di istruzioni (18 pagine), Manuale (12 pagine), Manuale (20 pagine), Manuale (16 pagine)

Stampa la pagina
Aqua Creek Products Ranger 2 Manuale
To reverse the direction of the seat on the lift begin by removing the 1"
jam nylock nut from the chair cradle. Then remove the 3/8" shoulder
bolt, fl ange bushing, sleeve bushing, fl at washer and nylock nut the
connects the chair cradle assembly to the control arm. Next, remove
the 1/4" button-head bolt and fl at washer connecting the control arm to
the base of the lift. The chair cradle assembly and control arm can now both be slid freely away
from the lift and "fl ipped" to the opposite side. Also, remove the 3/8" shoulder bolt, 5/16" fl at
washer and nylock nut connecting the actuator head to the base of the lift. With the hardware
removed, rotate the head of the actuator 180 degrees and then reinstall the hardware. Replace
all components and hardware in the reverse order of how it was uninstalled.
5/16" NYLOCK
5/16" FLAT
WASHER
3/8" SHOULDER
BOLT
FLANGE BUSHING
3/8" SHOULDER BOLT
CHAIR CRADLE
ASSEMBLY
Copyright © 2019 Aqua Creek Products All Rights Reserved

Field Reverse

5/16" NYLOCK
1" JAM NYLOCK
5/16" FLAT WASHER
SLEEVE BUSHING
CONTROL
ARM
5/16" NYLOCK
5/16" FLAT WASHER
SLEEVE BUSHING
CONTROL
ARM
1/4" BUTTON-HEAD BOLT
1/4" LOCK WASHER
1/4" FLAT WASHER
FLANGE BUSHING
3/8" SHOULDER BOLT
CHAIR CRADLE ASSEMBLY
1/4" BUTTON-HEAD BOLT
1/4" LOCK WASHER
1/4" FLAT WASHER
1" JAM NYLOCK
REVERSE
3/8" SHOULDER
BOLT
5/16" NYLOCK
5/16" FLAT
WASHER
You Will Need:
•
5/32" ALLEN WRENCH
•
3/16" ALLEN WRENCH
•
1/2" WRENCH
•
1-1/2" WRENCH
STANDARD
12
Revised 6/17/19