Aqua Creek Products Ranger 2 Manuale - Pagina 7
Sfoglia online o scarica il pdf Manuale per Apparecchiature di illuminazione Aqua Creek Products Ranger 2. Aqua Creek Products Ranger 2 12. Pool lift
Anche per Aqua Creek Products Ranger 2: Manuale di istruzioni (18 pagine), Manuale (16 pagine), Manuale (20 pagine), Manuale (16 pagine)
Stampa la pagina
Aqua Creek Products
Leaders in Recreation, Fitness and Ability
LIFT/INSPECTION INFORMATION
Test Date:
Pool Lift Model:
Serial Number:
Inspected By:
CLICK HERE or VISIT:
Maintenance Notes:
Please read and fill out all information carefully
Improper use and/or maintenance of pool lift can lead to actuator and/or other mechanical failures and possible
personal injury. Please read and follow the product operators' manual and the instructions below.
NOTE: Completely cycle the lift without a load before each use to verify the
lift is functioning properly
•
Product service life depends on the load characteristics, type and frequency of use, and the environment in which the
product is being used. For example, persons not calmly sitting but falling down with their full body weight in the chair, or
using the pool lift's chair as a diving platform can casue premature actuator failure and/or possible personal injury.
•
Based on historical product service life analysis, Aqua Creek recommends replacing the actuator(s) and other electronic
components after 5 years of service. Check component serial numbers and purchase records to verify the age of your
components.
•
A functional weight lifting force of a maximum of 100lbs. Must be periodically verified by applying a non-live load (without
a person) through the entire operating cycle of the lift. This process is performed in order to verify the smooth operation.
Make note of any unusual noises or sudden movements coming from the actuator(s) or other components. Note: In
some lifts, a sudden quick movement at the beginning of the cycle is normal but should smooth out over the course of
operation.
•
Creating a side load on the actuator by pushing and/or pulling on the actuator, especially under load conditions, can
casue damage to the actuator and or personal injury.
•
Electronic components are designed to be plug-and-play type replacements. There is no need to access the internal
mechanisms in these components. The actuator, battery, and all electronic components may only be disassembled by
authorized factory-trained personnel. Disassembly of electronic components by improperly trained and unauthorized
persons will void the warranty on those components.
•
The operator of the pool lift should never allow the pool lift to hit any stationary object either vertically or horizontally while
operating a pool lift, i.e. walls, ceiling, pool/spa bench, etc.
•
For quick and accurate troubleshooting and inspections, we recommend having a voltage meter on had as well as
adequate test and replacement components for the unit.
•
Remove the pool lift from service immediately if any unusual noise is heard coming from the actuator such as grinding,
popping or sudden inconsistent movements.
•
Immediately remove from service any lift that does not have 100% compliance with the inspection until the appropriate
corrections have been made by a qualified person.
For Service and/or replacement parts, contact Aqua Creek Products, LLC.
Toll Free: (888) 687-3552
R
www.AquaCreekProducts.com
.
Local/Intnl: (406) 549-0769
LIFT INSPECTION
For Additional Support Assistance Call:
Toll Free: (888) 687-3552
Local/Intnl: (406) 549-0769
For Additional Online Assistance Visit:
CLICK HERE or VISIT:
www.AquaCreekProducts.com/Help-
Center/Troubleshooting
www.AquaCreek.com
3/8/2023 1:49:22 PM PAGE - 7