AvMap PIN4i Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Allarme auto AvMap PIN4i. AvMap PIN4i 8. Tis immobilizer

3. Everyday use

● Always bring the device key inside the vehicle before starting the engine.

● The device key will automatically be detected by the device once driver door is open or start stop

button is pushed once without brake pedal pushed.

● Start the engine by pushing the brake pedal and pressing start stop button, then proceed with driving.

NOTICE

Always carry the device key together with the vehicle's original equipment key. It is recommended to attach

them to the same ring, to avoid losing or forgetting one of the keys, both being required for engine start

procedure.

Do not try to start the engine in the absence of the device key in the vehicle.

The device key must always be in the vehicle while driving. If the engine will be switched off while the key is

not in the vehicle, it will not be possible to restart the engine, until the key is back in the vehicle. Refer to

''Troubleshooting, Q&A'' section.

If the device key is kept in the vehicle for more than 21 minutes after engine stop with driver door close, the

system will arm. To avoid this auto-arming, switch the vehicle to ignition on for at least 10 seconds before

the 21 minutes pass. If no action was taken within the 21 minutes time, then the system can be

disarmed by following the same steps happening at vehicle access (open driver door, press start stop

button once without brake pedal pushed).

If the device key is kept unmoved in the vehicle more than 27 minutes after engine stop with driver door

close, the device key will enter in sleep mode. To avoid the sleep mode and auto-arming, switch the vehicle

to ignition on for at least 10 seconds before the 27 minutes pass. If 27 minutes passed without any action, in

order to allow the engine to start, the following actions must be taken:

● Shake device key and wait 5 seconds.

● Press the engine start button once, without brake pedal pushed or open the driver door.

● Wait 5 seconds.

● Proceed with engine start operation.

GSM communication in Roaming is enabled in factory. Functions of the device are available both in the

home country and in the roaming zone selected: Azores, Austria, Balearic Islands, Belgium, Bulgaria,

Canary Islands, Cyprus, Corfu, Crete, Croatia, Cyclades, Denmark, Desirade, Estonia, Finland, France,

Gibraltar, Greece, Greenland, Germany, Guadeloupe, Guernsey, French Guiana, Hungary, Åland Islands,

Îles des Saintes, Isle of Man, Faroe Islands, Ireland, Italy, Jersey, Latvia, Lithuania, Luxembourg, Madeira,

Malta, Marie-Galante, Martinique, Mayotte, Netherlands, Poland, Portugal, Czech Republic, Reunion,

Rhodes, Romania, UK, Sardinia, Sicily, Saint-Barthelemy, Saint-Marin, Saint-Martin (French), Saint Pierre

and Miquelon, Spain, Slovakia, Slovenia, Sweden, Vatican, Iceland, Liechtenstein, Norway, Switzerland,

Andorra, Bosnia and Herzegovina, Montenegro, North Macedonia, Albania, Kosovo, Rep. SRPSKA,

Ukraine and Serbia.

Please be aware that the speed of the data transfer depends on GSM antenna condition, embedded SIM

card network, cellular data network load, weather, road condition and/or other circumstances. The reseller/

manufacturer cannot guarantee a continuous and uninterrupted 100% data transfer or 100% connectivity.