Fender 021-5160-000 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Fender 021-5160-000. Fender 021-5160-000 7. Amp combo

Your amplifier is equipped with a grounding type supply

cord to reduce the possibility of shock due to electrical fault.

Be sure to connect it to a grounded receptacle. DO NOT

ALTER THE AC PLUG.

The "CUSTOM" VIBROLUX REVERB tube complement con-

sists of two Fender Special Design 6L6WGC/5881's (part

number 039214), five Fender Special Design 12AX7A's

(part number 013341), and one Fender Special Design

12AT7 (part number 023531). Fender's Special Design

Tubes provide optimum performance in this amplifier. For

best results, replace with Fender original equipment tubes

only. Tube location is printed on the tube label, inside the

cabinet.

TROUBLESHOOTER'S CHECKLIST

If the amp is set up but does not function, check the following items:

•

Is the amp power cord properly plugged into an electrical outlet?

•

Is there power at the outlet?

•

Is the fuse blown?

•

Are the speakers properly connected to the amplifier?

•

Is the amp on standby?

•

Is the amplifier volume control turned up above "three"?

•

Is the volume control on the instrument turned up?

•

Is your instrument properly plugged into the amplifier?

(Eliminate any effects pedals and try another guitar cord.)

If, after checking all of the above, the system is not performing

correctly, consult your Fender Service Center.

A very light soapy solution on a sponge may be used to

remove dirt and residue that may accumulate in the grain.

Be careful not to let liquid come in contact with operating

surfaces. DO NOT have the amplifier plugged into a

power outlet when cleaning.