Aqua Free Germlyser IL 1500 Istruzioni per l'uso
Sfoglia online o scarica il pdf Istruzioni per l'uso per Sistemi di filtrazione dell'acqua Aqua Free Germlyser IL 1500. Aqua Free Germlyser IL 1500 2.
Stampa la pagina6 Accesories for Germlyser
®
IL 1500
- Ø 8mm Connection hoses (red/blue)
• Quick release adapter
• Isolation valve
• Locking ring
Common accessories are to be found in the current accessories
catalog or at www.aqua-free.com.
7 Maintenance and cleaning
IL 1500 requires no maintenance within the specified operating time. The outside of the
The Germlyser
®
filter can be treated by common surface disinfectants. Replace the connecting hoses, if necessary, for
example in case of leaks. For longer periods of non-use, it is recommended to close the water supply.
In the case of a deviation from the specifications or a damage of the packaging, the product should be
returned to Aqua free, along with a Defect Report. The Defect Report form is available to download from
the service page of the Aqua free website (www.aqua-free.com).
Please note: Aqua free operates its own replacement service, which can be used by facilities with 25, or
more, filter points of use.
8 Storage
filter must be properly stored in a dry and hygienic environment at a temperature between
The Germlyser
®
10 and 50°C.
9 Returning
reusable filters must be sent back to Aqua free within the agreed time for reprocessing
®
The Germlyser
(form downloads at the service page under www.aqua-free.com).
Aqua free Solutions Ltd.
Headquarters:
Aqua free GmbH
The Media Centre
Winsbergring 31
7 Northumberland Street
22525 Hamburg
Huddersfield, HD1 1RL, Great Britain
Germany
E-Mail:
Phone:
Phone:
+44 (0)1484 483045
Fax:
www.aqua-free.com
+49 (0)40-46 89 99 90
+49 (0)40-46 89 99 99
Instructions for use
®
Germlyser
IL 1500
Table of contents
1 Product
2 Certificates / Declaration of conformity
3 Labelling
4 Preparation of commissioning and use of product
5 Disassembly of used filter / filter change
6 Accessories
7 Maintenance / cleaning
8 Storage
9 Return
1 Product
1.1 Product description
The Germlyser
IL1500 filter is a
-marked, inline, sterile filters for use in cold water inlets of medical
®
equipment to prevent bacterial nosocomial infectious diseases caused by Pseudomonas aeruginosa,
Legionella pneumophila, Stenotrophomonas maltophilia or Staphylococcus aureus among immunosuppressed
and immunocompromised patients. To achieve this intended use, a specific combination of retention of these
bacteria in the filter membrane structure and specific measurements to prevent retrogarde contamination with
these bacteria on the filter outlet, are necessary.
1.2 Technical data
Size:
L 122 mm x Ø 43 mm
Retention*:
7 log steps Brev. dim.
Pore size:
0.2 µm
Operating time**:
Depending on the application
*
Measured in accordance with the international ASTM F838-15a standard - Standard Test Method for
Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
** The operating time depends on application conditions like water quantity and water quality.
*** Continuous dosage of ≤ 10 ppm over operating time; short-term (1h) high dosage (400,000 ppm)
for chemical disinfection.
Chlorine resistance***:
<10 ppm
Minimum flow rate:
6 l/min at 5 bar, at 25°C
Maximum operating pressure: 5 bar
Connection:
Quick-release coupling
www.aqua-free.com