Aqua Free Baclyser neo S Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Prodotto idraulico Aqua Free Baclyser neo S. Aqua Free Baclyser neo S 20.

Stampa la pagina

Product description

The Baclyser

neo S is a

-marked, sterile, point-of-use

shower filter

for use in high-risk areas in medical facilities for

the prevention of bacterial nosocomial infections caused by

Pseudomonas aeruginosa, Legionella pneumophila, Stenotro-

phomonas maltophilia or Staphylococcus aureus in immuno-

compromised and immunosuppressed patients. The effect is

achieved by interrupting the transmission pathway of these

germs through filtration of the water and protection against

retrograde contamination during use of the water taps through

hygienic design and antimicrobial protection functions. The

Baclyser

neo S is available in 3 different service lives: 2M, 3M

and 4M.

Technical data

Size: ø Shower head: 92 mm,

ø Handle: 41 mm, Length: 256 mm

Retention: 7 log steps

Membrane: Hollow fibre, pore size 0.2 μm

Operating time: 62, 93 or 124 days (2M,

3M or 4M)

Flow rate: 15 l/min at 5 bar, 11 l/min

at 3 bar

Max. operating pressure: 5 bar

Max. operating temperature: 60 °C

(at 70 °C ≤ 30 min over operating time)

Connection: G ½" thread

Chlorine resistance: ≤ 10 ppm

Chlorine dioxide resistance: ≤ 0,8 mg/l

92 mm

256 mm

Sterile filtration: Path-

ogen retention ≥ 10

diminuta CFU/cm

membrane surface (= 7

log steps).

Measured in accordance

with the international

ASTM F838-20 standard

– Standard Test Method

for Determining Bacterial

Retention of Membrane

Filters Utilized for Liquid

Filtration.

Depending on water qual-

ity. If you use the Aqua

free filter change service,

the filter will be changed

every 8, 12 or 16 weeks.

The Baclyser

neo S

must not be connected

to low pressure units

(boiler).

Continuous dosage of ≤

10 ppm over operating

time; short-term (1h) high

dosage (400,000 ppm)

for chemical disinfection.

filter