Aqua Lung EPG Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Strumento per l'immersione Aqua Lung EPG. Aqua Lung EPG 16. Electronic pressure gauge

Using a lint-free cloth, wipe the new battery clean of any skin oils. Wipe away any

moisture that may be in or around the battery compartment. Install a new CR2450

battery, + side up, into the battery compartment.

Lightly lubricate a new O-ring using a food-grade silicone grease. This grease is available

at most dive shops. Do not over-lubricate. Install the new O-ring onto the battery hatch.

Carefully thread the battery hatch into the case bottom in a clockwise direction until snug.

Using a coin, tighten the battery hatch until it is flush with the case back.

Activate the unit to make sure it is operating properly. Install the EPG back into the

console boot.

Figure 15

Figure 16

Figure 17