Aqua Medic Kauderni CF Manuale operativo - Pagina 11
Sfoglia online o scarica il pdf Manuale operativo per Acquari Aqua Medic Kauderni CF. Aqua Medic Kauderni CF 18.
Anche per Aqua Medic Kauderni CF: Manuale operativo (13 pagine)
Stampa la pagina
3.
Skimmer EVO 500
See separate manual. The skimmer is hooked to the rear wall of the filter sump with the holding
unit without screws (refer to Fig. 2).
4.
Lighting 2 x Ocean Light LED 36 W
4.1. Technical data
Power requirements: 100 - 240 V AC, 50 - 60 Hz.
- 3 watts high-performance LEDs
- total lumen 4.944
- colour temperature 14,000 K
- safety voltage 24 V with external power pack
Version:
- Ocean Light LED 36 watts (4 x 3 watts blue and 8 x 3 watts 12,000 K)
Dimensions (l x w x h): approx. 600 x 120 x 25 mm
The body is made of anodized aluminium. The cooling is done passively.
4.2. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of
complaints, please contact your dealer directly.
Included in shipment:
Ocean Light LED incl. power pack 24 V DC output
•
Aquaria fixing
•
Fig. 4: Holder for Ocean Light LED
The holder are adjusted using a crosstip screwdriver so that the lights are safely placed in the
guide rails. If a control cable is used, the lights have to be adjusted by moving the holder.
4.3. Safety advices
The housing may become hot during operation. Be cautious when touching it! For cleaning,
•
disconnect the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning, take care that no humidity passes the ventilation slits and enters the interior of
•
the lighting system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
•
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
•
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
When working on the light, always pull all power plugs.
•
11